Center Caps for Stock Rims (2014 Prius Two)

Ebay if you are on a budget, just be sure to measure them. If you are made of money then you can just get them at the dealer.

I am on the fence about doing this to mine and have been watching the ebay auctions for a while until I decide.

 

Go to Lowes or HD and get some 1-1'2" (IIRC) electrical box knockout covers.
They look like this:


Sometimes they don't have the dimple, and sometimes they will or will not have a 1-1/2" stamped in them.
They usually come in a bag of 5 for a buck or two, and you can paint them for another buck or two or leave them as-is.

The last time I looked, LOWES had them plain/shiny as pictured.
You may have to bend the tabs out a little to get a firm seat on the rim, but hey.....it's a buck or two.

You can get cheap ($20 or so) center caps from Flebay or maybe Amazon.
Some of these will even have the crossed a**hole Toyota symbol......or?...... you can get the "real" ones from the delaer for about double that.
Your call.

I know what I would do.


Good Luck

 

quoted myself from a post long time ago. Just click the upwards arrow and it'll expand. Hope this helps.

 

I bought this exact set below and they fit perfectly. Sorry I've posted less than 5 times so I couldn't post a link yet.

 

Amazon.com: 4pcs. 2010 - 2013 PRIUS CENTER CAP 3RD GEN CENTER WHEEL HUB CAP SET 42603-52110: Automotive

 

The market responds.....

 

The 1-1/2 inch size is from memory!

Measure twice, buy once.....and let us know how it works!

 

I did this too and works great. The punch out blocks don't fit perfectly, they are kind of crooked, but they cover the hole and look good enough.