1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Drop in replacement battery question

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by luckyboy, Jan 29, 2016.

  1. luckyboy

    luckyboy Member

    Joined:
    Feb 16, 2007
    204
    29
    0
    Vehicle:
    2007 Prius
    So to be clear, the "51JIS Battery RK-AGM51JIS by Exide Technologies for $119.99 : Rural King" should be a drop in replacement for my prius (genII 2007)? I don't have the smart key so from what I understand the battery tray is different since it originally came with a smaller battery, but I assume that shouldn't be too hard to replace with the OEM tray from a smark-key genII prius
     
    #1 luckyboy, Jan 29, 2016
  2. DRACO

    DRACO Member

    Joined:
    Nov 28, 2015
    362
    77
    0
    Location:
    Rancho Palos Verdes, California
    Vehicle:
    2002 Prius
    Model:
    One
    If you are a diyer mechanic, yes it will be easy. just make sure the polarity is correct.

    Remember, when you remove the battery connectors, NEGATIVE side first then Positive. On install, positive then negative
     
    #2 DRACO, Jan 29, 2016
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,679
    48,930
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    wow, great price! does it have the vent tube and correct post diameter?
     
    #3 bisco, Jan 29, 2016
  4. priuslovers

    priuslovers Way Out Member

    Joined:
    Sep 3, 2008
    65
    2
    0
    Location:
    Hercules, California
    Vehicle:
    2013 Prius
    Model:
    Persona
    If you are interested I have a fairly new OEM 12 volt battery. Priuslovers
     
    #4 priuslovers, Jan 29, 2016
  5. cproaudio

    cproaudio Speedlock Overrider

    Joined:
    Jul 7, 2010
    2,401
    758
    0
    Location:
    CA
    Vehicle:
    2010 Prius
    Model:
    V
    I'm not sure if the group 51JIS have the same standard as the Prius but I know all of Exide variant AGM batteries are BMW standards. Make sure they ship with the battery with the vent elbows. If it doesn't come with the vent elbows, you can use the BMW battery vent elbow. They didn't ship the vent elbows when I ordered mine from Rural King. I research the Prius batteries when I replaced mine last year.
     
    #5 cproaudio, Jan 29, 2016
  6. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,198
    6,463
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    #6 Patrick Wong, Jan 30, 2016
  7. luckyboy

    luckyboy Member

    Joined:
    Feb 16, 2007
    204
    29
    0
    Vehicle:
    2007 Prius
    Thanks, placed my order and we'll see how the install goes. $120-$20MIR, no tax for me, free shipping and no core charge that I could see on the receipt. Current OEM battery is on the fritz (9 years old this month since I bought the car new, battery must be at least a few months older). If I start in ACC mode and turn on the headlights and rear defroster the voltage drops to almost 9v and kills the car, and that was after fully topping off the battery with a trickle charger the day before....
     
    #7 luckyboy, Feb 1, 2016
    Last edited: Feb 2, 2016
  8. luckyboy

    luckyboy Member

    Joined:
    Feb 16, 2007
    204
    29
    0
    Vehicle:
    2007 Prius
    Just to follow up. Battery came this past week, was fresh (manufactured dec 15, with a shipped jan 16 sticker) and came with the elbow vent that was compatible with the vent tubing already in the car. It was a quick in and out install, well in my case I didn't get the smart key bracket/tray yet so its being held with a couple blocks of wood until the next time I visit the junkyard.
     
    #8 luckyboy, Feb 13, 2016
    bisco likes this.
  9. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,679
    48,930
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    what was the vua? (voltage upon arrival)
     
    #9 bisco, Feb 13, 2016
  10. exstudent

    exstudent Senior Member

    Joined:
    Jul 11, 2009
    2,210
    899
    0
    Location:
    Torrance, CA
    Vehicle:
    2007 Prius
    If I could do the battery upgrade over again, I would now have simply just cut the metal arm off (lengthwise arm), as it simply acts as a book end. If you really want the 'book end,' trim a piece of wood (2x4 or 4x4) to fill the void, securing the wood to the bottom of the metal bracket with some wood screws, to be flush into the bottom of the metal bracket.

    This thought never occurred to me until I read Britprius' mobility AGM battery upgrade.
     
    #10 exstudent, Feb 13, 2016
  11. luckyboy

    luckyboy Member

    Joined:
    Feb 16, 2007
    204
    29
    0
    Vehicle:
    2007 Prius
    12.7v
     
    #11 luckyboy, Feb 15, 2016
(You must log in or sign up to post here.)