1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Check the connection of Air Conditioning Error

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by hardish, Feb 20, 2016.

  1. hardish

    hardish Junior Member

    Joined:
    Dec 12, 2013
    54
    0
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    I have 2006 Prius. Recently I replace the stock radio with an aftermarket radio. Radio is working fine, but air conditioning is not working. MFDisplay shows the message " check Air conditioning connection" Pics attached. Went through whole process again today and error message still there. Did not find any connector that were not connected.
     

    Attached Files:

    #1 hardish, Feb 20, 2016
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,679
    48,931
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    could something have been pulled loose from the mfd?
     
    #2 bisco, Feb 20, 2016
  3. hardish

    hardish Junior Member

    Joined:
    Dec 12, 2013
    54
    0
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    Double checked all connections on the back of the MFD. Did not find anything loose or not properly connected.
     
    #3 hardish, Feb 21, 2016
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,679
    48,931
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i suppose a check of the 12v health is warranted, as usual. also, disconnecting the negative cable for a few minutes.
     
    #4 bisco, Feb 21, 2016
  5. jdenenberg

    jdenenberg EE Professor

    Joined:
    Nov 21, 2005
    3,836
    1,827
    1
    Location:
    Trumbull, CT
    Vehicle:
    2020 Prius
    Model:
    LE AWD-e
    #5 jdenenberg, Feb 21, 2016
  6. hardish

    hardish Junior Member

    Joined:
    Dec 12, 2013
    54
    0
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    Thanks for that information. Before I read your response, I did some research and connected factory radio along with the aftermarket radio and MFD showed no errors. OEM radio is only have power with no speaker wires connected to it.

    Next week I will take it apart to connect 68 Ohm resistor as you described. For now whole system is working. Thank you.
     
    #6 hardish, Feb 21, 2016
(You must log in or sign up to post here.)