1. Attachments are working again! Check out this thread for more details and to report any other bugs.

calling rim experts

Discussion in 'Gen 3 Prius Accessories and Modifications' started by ilovegirls, Mar 18, 2016.

  1. ilovegirls

    ilovegirls Member

    Joined:
    Jan 3, 2016
    172
    40
    0
    Location:
    San Diego
    Vehicle:
    2010 Prius
    Model:
    V
    Hello.

    I'm looking to pick up a set of rims. I don't understand offset that much and I don't want to guess. I tried to read up on offset on tire rack and other sites but it's too confusing. The rims I'm looking at are :

    17 x 7.5 offset +43

    My current tire size is 215/45/17. Will this put me flush with the fenders? I'm dropped about 1.25".

    Thanks for your help.
     
  2. ilovegirls

    ilovegirls Member

    Joined:
    Jan 3, 2016
    172
    40
    0
    Location:
    San Diego
    Vehicle:
    2010 Prius
    Model:
    V
    Ok.. since I'm a hands on type of person, one of my friends showed me how offset works and what the numbers mean relative to the stock offset in person. In this situation, my new rim would move approx 13mm towards the fender. This would make it a little more flush. Hope this helps someone out there.
     
  3. HelloHybrid

    HelloHybrid Senior Member

    Joined:
    May 6, 2015
    482
    1,483
    0
    Location:
    San Diego, CA
    Vehicle:
    2015 Prius
    Model:
    Two
  4. ataylorracing

    ataylorracing ataylorracing

    Joined:
    Jan 15, 2012
    171
    29
    5
    Location:
    Fishers, IN
    Vehicle:
    2011 Prius
    Model:
    Two
    Using the same size tires in your tread...compared to the stock Prius 17s
    Stock rims are also 7.5 inches in width...only the 45 mm off set on your and 43 on news are different. The new rim/tire package should make everything only stick out about a tenth of an inch...no worries at all.
     
  5. andino

    andino Senior Member

    Joined:
    Jul 15, 2009
    746
    550
    0
    Location:
    San Jose, CA
    Vehicle:
    2010 Prius
    Model:
    III
    It will be more flush than stock but not quite flush. You'll need to run an 8" width and +35 to +40 to be flush up front. Rears are flush at 9" +35
     
    HelloHybrid likes this.