1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Light bar in grill

Discussion in 'Gen 3 Prius Accessories and Modifications' started by Palulf, Nov 30, 2014.

Page 2 of 3
  1. Palulf

    Palulf Junior Member

    Joined:
    Jul 14, 2012
    68
    24
    0
    Location:
    Bergen, Norway
    Vehicle:
    2010 Prius
    Model:
    II
    Here are some picture of the mounted led bar.
    I ended up doing it in a hurry to make it work for a trip.
    My first mount was therefore wrong (the one you see in the pictures).
    The led bar touched the grill and had to be moved 4-5 cm further back. This was quickly fixed.
    When I came back from the trip, I replaced the wire harness with a better one, put in more bolts and
    made everything look clean and nice. And washed the car!!!

    Result: If you are looking for more light and don't want to alter the look of your car too much
    (like me), this will do the trick. The output is... as mentioned above... like 10-12 headlights :)

    NB! This is a lot of light. With a little help from xliderider, it was wired so it would turn off
    when you turn your high beams off. It is pretty strong for oncoming traffic. Use it when you
    are alone on the road. Or get a smaller led bar. Thanks to everyone that helped!

    I will post a picture of the led bar at work, but was hoping for some nicer weather.

    [​IMG]
    The mount is solid!

    [​IMG]
    The led bar can be adjusted to point more up or down. I went with straight ahead.

    [​IMG]
    The grill does not get in the way. The output is a 20 or 30 degree cone.

    [​IMG]
    Here is a quick drawing of the cabling. I hope I got it right.
     
    #21 Palulf, Jan 1, 2015
    ckam1989, slowpriusj, Burna J and 1 other person like this.
  2. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    Damn I like this!
     
    #22 Accordlayingkit, Jan 1, 2015
    ckam1989, slowpriusj and Palulf like this.
  3. Yakoma

    Yakoma Active Member

    Joined:
    Oct 17, 2014
    470
    122
    0
    Location:
    ATL-ish
    Vehicle:
    2008 Prius
    Model:
    N/A
    Good job Palulf. Any pics at night with and without light bar on?
     
    #23 Yakoma, Jan 1, 2015
    Palulf likes this.
  4. t0pgear

    t0pgear Member

    Joined:
    Nov 15, 2013
    50
    30
    0
    Location:
    Colorado High Country/LA/Bay Area
    Vehicle:
    2010 Prius
    Model:
    III
    Been thinking about this for a while, only problem is I wanted behind the grill but with all the snow in the mountains of Colorado my grill is usually packed with snow at the end of a ski trip. thinking maybe putting it on my roof rack but doing one that is easily detachable with a quick clip so I don't look completely ridiculous when I get back to the city
     
    #24 t0pgear, Jan 2, 2015
    Palulf likes this.
  5. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    So did those brackets come with the light or did you have them made or buy them?
     
    #25 Accordlayingkit, Jan 2, 2015
  6. Palulf

    Palulf Junior Member

    Joined:
    Jul 14, 2012
    68
    24
    0
    Location:
    Bergen, Norway
    Vehicle:
    2010 Prius
    Model:
    II
    No, the light comes with 4 brackets underneath that are cushioned by rubber. I just bought 4 "L" shaped brackets, cheap, at the local hardware store for them to be bolted on to. I also turned the led bar upside down.

    Like these. Less than a dollar a piece. Just get them long enough as the
    let bar need to be moved a bit further back than on the pictures.

    Then I bought M5 bolts (5mm x 4 or 5cm) and "stopping" nuts.

    The bumper is about 5mm aluminium. My bolts were not long enough to go all the way through both layers so at one point I thought I had to stop working, but then I just drilled 4,5mm holes and let the bolts make their own threading. That worked well, but I might have to fix that later.

    I should have made a better guide, as some of the guides in here are really good,
    but when I did it, it all happened so fast and it is a rather simple mod :)


    [​IMG]
     
    #26 Palulf, Jan 2, 2015
    Last edited: Jan 2, 2015
    Accordlayingkit likes this.
  7. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    no night pics yet?
     
    #27 Accordlayingkit, Jan 2, 2015
  8. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    Bump
     
    #28 Accordlayingkit, Jan 3, 2015
  9. Dr_DLH

    Dr_DLH Member

    Joined:
    Apr 9, 2012
    106
    19
    0
    Location:
    California
    Vehicle:
    2011 Prius
    Model:
    III
    I purchased the HID bulbs with the separate ballast for my fog lights and they light up the road pretty good on really dark nights. I purchased the 6000k bulbs. I also did the osram H9 conversion for my headlights as I couldn't see at all while driving at night on my 2011 model. I have a 30" LED bar I purchased 6 months ago and wanted to insert in my grill flush. Had all the tools to do until I found out the whole front area was plastic. Will attempt again with some brackets.
     
    #29 Dr_DLH, Jan 3, 2015
  10. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    Earth to @Palulf.... any night pics!? haha
     
    #30 Accordlayingkit, Jan 4, 2015
  11. Palulf

    Palulf Junior Member

    Joined:
    Jul 14, 2012
    68
    24
    0
    Location:
    Bergen, Norway
    Vehicle:
    2010 Prius
    Model:
    II
    sorry for the delay.
    My wife's father had to go to the hospital so it has been a busy weekend.
    The weather has also been nothing but heavy rain. No winter wonder land in sight.

    I did take the car out for a spin tonight, just to discover that after I cleaned up the install, the led bar now points too much down. This was... a bit disappointing so I opted no to take any pictures. I am sorry. I'll try to get the front off and adjust it as soon as possible...
     
    #31 Palulf, Jan 4, 2015
  12. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    My bad sorry to hear about the wife's father...
     
    #32 Accordlayingkit, Jan 4, 2015
  13. MghtyPtrck

    MghtyPtrck Junior Member

    Joined:
    Sep 25, 2013
    1
    0
    0
    Vehicle:
    2012 Prius
    Model:
    Two
    Very interested in doing this to Prius and googled if it had done before and what do ya know, someone else has already attempted this! Kudos! Can you please upload pics of the output of the light behind the grill? thanks!
     
    #33 MghtyPtrck, May 4, 2015
  14. WA///M

    WA///M New Member

    Joined:
    Jul 15, 2014
    11
    2
    0
    Location:
    Chicago, IL
    Vehicle:
    2010 Prius
    Model:
    Two
    Looks great so far. Looking forward to seeing the progress as it continues.
     
    #34 WA///M, May 5, 2015
  15. NicHarper

    NicHarper New Member

    Joined:
    Aug 6, 2015
    3
    11
    0
    Location:
    Leipsec, De
    Vehicle:
    2011 Prius
    Model:
    One
    BETTER WAY.

    Simply flip the horns and make some brackets and mount a 20" Rough Country Cree light bar (dual row).

    IMG_20150731_160915:nopm:.jpg
    There is is mounted. It is hovering approx. 1/2" from the top radiatior. I've taken temperature readings and it has not affected anything. Horns seem louder since they needed to be flipped around. I centered to the Toyota logo. Here is the final product. IMG_20150731_160348.jpg Please keep in mind I told the photo before I secured the bumper back up. does great at night. At least 9000 lumens. Best thing is the side blocks of floods on the light bar are still shining without any obstacles. I get "is that a prius?!?" All the time. Its one of the sportist versions I've seen. I'll leave you with two other photos of the epicness. IMG_20150731_184001.jpg IMG_20150731_213547:nopm:.jpg the split is more the well in front of the car. Sorry, I can summit another if needed guys.
     
    #35 NicHarper, Aug 6, 2015
    m.wynn, HelloHybrid, BigBear2010 and 5 others like this.
  16. BigBear2010

    BigBear2010 Member

    Joined:
    Feb 7, 2014
    156
    65
    0
    Vehicle:
    2010 Prius
    Model:
    II
    How about one pic w/o headlight from cabin and one pic w/ both? Thqnks
     
    #36 BigBear2010, Aug 9, 2015
  17. NicHarper

    NicHarper New Member

    Joined:
    Aug 6, 2015
    3
    11
    0
    Location:
    Leipsec, De
    Vehicle:
    2011 Prius
    Model:
    One
    OK, well I got you some more stuff. Ignore my speed. Lol



    Figured this will work out.
     
    #37 NicHarper, Aug 10, 2015
    kenmce, runnyeggs and Dylan Doxey like this.
  18. BigBear2010

    BigBear2010 Member

    Joined:
    Feb 7, 2014
    156
    65
    0
    Vehicle:
    2010 Prius
    Model:
    II
    What u mean when u said in the vid:"bright"
     
    #38 BigBear2010, Aug 10, 2015
  19. NicHarper

    NicHarper New Member

    Joined:
    Aug 6, 2015
    3
    11
    0
    Location:
    Leipsec, De
    Vehicle:
    2011 Prius
    Model:
    One
    Brights aka High beams. Sorry.
     
    #39 NicHarper, Oct 31, 2015
  20. trip1027

    trip1027 Member

    Joined:
    Mar 29, 2016
    106
    27
    0
    Location:
    wyoming
    Vehicle:
    2010 Prius
    Model:
    IV
    What yall think yay or nay just a mock up for now

    SM-N920V ?
     
    #40 trip1027, Jun 12, 2016
(You must log in or sign up to post here.)
Page 2 of 3