1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2006 Prius VSC, ABS, (!) lights all on!!

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by shaiden, Sep 20, 2016.

  1. shaiden

    shaiden New Member

    Joined:
    Sep 20, 2016
    5
    0
    0
    Location:
    encinitas
    Vehicle:
    2006 Prius
    Model:
    N/A
    Hey everyone so my 2006 prius suddenly had all these lights turning on the other day. At first the master triangle red light turned on as well but turned off now. Also my tire pressure light is on due to what we think is a bad sensor but its been on for awhile and i think it's irrelevant to this current issue. What do I do?

    I've tried testing the 12 V and from what I'm seeing it seems normal so now I'm at a loss as to what else to do.

    Car is running fine.
     
    #1 shaiden, Sep 20, 2016
  2. fotomoto

    fotomoto Senior Member

    Joined:
    Apr 22, 2009
    5,602
    3,781
    0
    Location:
    So. Texas
    Vehicle:
    Other Hybrid
    First thing to do is get the trouble codes read.
     
    #2 fotomoto, Sep 20, 2016
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    109,381
    49,726
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    welcome! what is normal?
     
    #3 bisco, Sep 20, 2016
  4. shaiden

    shaiden New Member

    Joined:
    Sep 20, 2016
    5
    0
    0
    Location:
    encinitas
    Vehicle:
    2006 Prius
    Model:
    N/A
    there arent any fault codes when i use my scan tool
     
    #4 shaiden, Sep 20, 2016
  5. ILuvMyPriusToo

    ILuvMyPriusToo Senior Member

    Joined:
    Dec 4, 2014
    778
    514
    0
    Location:
    Outside Philly, PA
    Vehicle:
    2009 Prius
    Model:
    II
    You need to use a mini VCI cable to read some Toyota specific codes.
     
    #5 ILuvMyPriusToo, Sep 20, 2016
  6. bikes4u

    bikes4u Member

    Joined:
    Sep 8, 2015
    131
    39
    0
    Location:
    indianapolis
    Vehicle:
    2005 Prius
    Model:
    IV
    the red triangle turned on then went back off----check your oil and see if it's low
     
    #6 bikes4u, Sep 20, 2016
  7. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,479
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    While the Prius is READY, look at the inverter coolant reservoir for fluid turbulence. If you do not see this, the inverter coolant pump has failed.

    Since you see the VSC, ABS and ((!)) warning lights on, the skid control ECU definitely has logged DTC. As previously suggested, use Mini VCI to retrieve those.
     
    #7 Patrick Wong, Sep 20, 2016
  8. shaiden

    shaiden New Member

    Joined:
    Sep 20, 2016
    5
    0
    0
    Location:
    encinitas
    Vehicle:
    2006 Prius
    Model:
    N/A
    alright so a P0A93 code just popped up. Inverter cooling system
     
    #8 shaiden, Sep 21, 2016
  9. fotomoto

    fotomoto Senior Member

    Joined:
    Apr 22, 2009
    5,602
    3,781
    0
    Location:
    So. Texas
    Vehicle:
    Other Hybrid
    #9 fotomoto, Sep 21, 2016
  10. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,406
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Toyota is out of these inverter pumps. You'll need to get it online somewhere
     
    #10 JC91006, Sep 21, 2016
  11. exstudent

    exstudent Senior Member

    Joined:
    Jul 11, 2009
    2,214
    901
    0
    Location:
    Torrance, CA
    Vehicle:
    2007 Prius
    Did do as Patrick said in Post #7? Verify that you see or don't see turbulence/fluid movement in inverter reservoir? If no turbulence/fluid movement when the car is IG-ON or READY, the inverter pump is dead and needs to be replaced.

    Many posts on how to replace.
     
    #11 exstudent, Sep 21, 2016
  12. shaiden

    shaiden New Member

    Joined:
    Sep 20, 2016
    5
    0
    0
    Location:
    encinitas
    Vehicle:
    2006 Prius
    Model:
    N/A
    Yeah the fluid isnt moving. Wasnt this a recall or are they not doing the recall anymore?
     
    #12 shaiden, Sep 21, 2016
  13. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,406
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    If you have not done the recall, the repair would be free. However Toyota is out of these pumps, you'll probably get a free rental until the repair is completed
     
    #13 JC91006, Sep 21, 2016
  14. shaiden

    shaiden New Member

    Joined:
    Sep 20, 2016
    5
    0
    0
    Location:
    encinitas
    Vehicle:
    2006 Prius
    Model:
    N/A
    Can i use zerex asian fluid in the inverter? Ordered a pump online and am about to install any tips?
     
    #14 shaiden, Sep 24, 2016
  15. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,406
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Yes you can use zerex asian
     
    #15 JC91006, Sep 24, 2016
(You must log in or sign up to post here.)