1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Prius cell throw code cell block becomes weak

Discussion in 'Gen 2 Prius Technical Discussion' started by Parrish21r, Oct 21, 2016.

  1. Parrish21r

    Parrish21r Junior Member

    Joined:
    May 25, 2016
    43
    1
    0
    Location:
    36301 Dothan Alabama
    Vehicle:
    2006 Prius
    Model:
    N/A
    On techstream when the car is running it's throwing code for cell block 2 becomes weak. Yesterday I finally identified which cell was acting unusual and replaced both cells in cell block 2 with cells from a 2014 prius that I got new. I balanced everything before test driving and when I get on the gas at about 31 mph the triangle comes on and when I decrease speed down til the motor cuts off the triangle comes on. Any ideas?

    Posted via the PriusChat mobile app.
     
  2. jadziasman

    jadziasman Prius owner emeritus

    Joined:
    Jan 17, 2011
    1,355
    486
    0
    Location:
    District 6
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    The 2014 modules might not be a good match to your old 2006 modules. Did you scan for DTCs yet? That's
    the first thing I would do.
     
  3. Parrish21r

    Parrish21r Junior Member

    Joined:
    May 25, 2016
    43
    1
    0
    Location:
    36301 Dothan Alabama
    Vehicle:
    2006 Prius
    Model:
    N/A
  4. jadziasman

    jadziasman Prius owner emeritus

    Joined:
    Jan 17, 2011
    1,355
    486
    0
    Location:
    District 6
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Are you certain you replaced the correct modules? Block 2 is on the passenger side of the battery. Some have
    made the mistake of replacing Block 13 (which is near the battery ECU on the driver's side) instead.
     
    #4 jadziasman, Oct 21, 2016
    Last edited: Oct 21, 2016
  5. strawbrad

    strawbrad http://minnesotahybridbatteries.com

    Joined:
    Aug 9, 2011
    953
    993
    0
    Location:
    Minnesota
    Vehicle:
    2005 Prius
    Model:
    II
    Check your engine oil.

    Really!

    Low oil will slosh around on acceleration and deceleration. This will cause the triangle to go on and off.

    Brad
     
  6. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A