1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2009 Prius Rubber Thingy on Roof Came Off

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by pauly99, Feb 4, 2017.

  1. pauly99

    pauly99 Junior Member

    Joined:
    Apr 23, 2016
    37
    10
    0
    Location:
    Montgomery
    Vehicle:
    2009 Prius
    Model:
    Two
    So I went through one of those car washes where it dries the car using these high power dryers. One of the rubber thingy's in the track on top of the roof absolutely went flying off while the other one was sticking up in the air. I can put them back on in the clips but I know in similar circumstances, the same thing is going to happen again. So what can I do to make sure these rubber parts stay where they should?
     
    #1 pauly99, Feb 4, 2017
  2. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A
    They make trim that fits in that Groove if I remember I just three quarter inch and just tuck it under the windshield rubber with a little bit of extra glue silicone to keep it down about the graphite Style or you can get the spring-loaded stuff the dealer sales at a junkyard

    Posted via the PriusChat mobile app.
     
    #2 Jmack111, Feb 4, 2017
  3. pauly99

    pauly99 Junior Member

    Joined:
    Apr 23, 2016
    37
    10
    0
    Location:
    Montgomery
    Vehicle:
    2009 Prius
    Model:
    Two
    The rubber is in good shape so at this point I'm thinking of just adding some adhesive to help it stay in the track. Sound good?
     
    #3 pauly99, Feb 4, 2017
  4. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A
    Do you have the spring it kind of stretches and hold it on but you could glue it they make plumber silicone super strong and just make sure you talk under the windshield where the most when will hit it and work your way back

    Posted via the PriusChat mobile app.
     
    #4 Jmack111, Feb 4, 2017
  5. pauly99

    pauly99 Junior Member

    Joined:
    Apr 23, 2016
    37
    10
    0
    Location:
    Montgomery
    Vehicle:
    2009 Prius
    Model:
    Two
    I think I just have the clips. I'll have to take a look.
     
    #5 pauly99, Feb 4, 2017
  6. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A
    #6 Jmack111, Feb 4, 2017
  7. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A
    #7 Jmack111, Feb 4, 2017
  8. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A
    It notched so the top Edge sits on top of the window rubber and there's a notch where that little piece sticks out in the rubber so it lays flat


    Posted via the PriusChat mobile app.
     
    #8 Jmack111, Feb 4, 2017
  9. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A
    There held down with a spring pull back and lift to remove don't let go or it will fly and land on hood

    Posted via the PriusChat mobile app.
     
    #9 Jmack111, Feb 4, 2017
  10. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A
    Think it was $10 on eBay for the aftermarket they wanted $60 for the one rubber piece with spring which didn't match the same color as the other side that was faded

    Posted via the PriusChat mobile app.
     
    #10 Jmack111, Feb 4, 2017
  11. pauly99

    pauly99 Junior Member

    Joined:
    Apr 23, 2016
    37
    10
    0
    Location:
    Montgomery
    Vehicle:
    2009 Prius
    Model:
    Two
    #11 pauly99, Feb 4, 2017
  12. pauly99

    pauly99 Junior Member

    Joined:
    Apr 23, 2016
    37
    10
    0
    Location:
    Montgomery
    Vehicle:
    2009 Prius
    Model:
    Two
    So what I find out was I have clips... only I am missing at least one clip on each side. I see one clip in front on the drivers side and one clip in back on the passenger side. The rubber looks to be in great shape. First of all I think I'm going to need to find some clips but I wouldn't mind seeing a link where you bought your stuff on Ebay.
     
    #12 pauly99, Feb 4, 2017
  13. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A
    I just 3/4 trim and where there is clips you'll have to draw out some of the rubber so it lays perfectly flat then a little bit of silicone plumber's goop stuff

    Posted via the PriusChat mobile app.
     
    #13 Jmack111, Feb 4, 2017
  14. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A
    #14 Jmack111, Feb 4, 2017
(You must log in or sign up to post here.)