1. Attachments are working again! Check out this thread for more details and to report any other bugs.

door lock not working

Discussion in 'Gen 2 Prius Technical Discussion' started by dj80d6, Feb 15, 2017.

  1. dj80d6

    dj80d6 New Member

    Joined:
    Feb 15, 2017
    18
    2
    0
    Location:
    sacramento
    Vehicle:
    2009 Prius
    Model:
    One
    when i looked for fuses it only had one and that was #11 and it was fine.
     
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    it's baffling. i don't recall anyone having a one way problem before. i hesitate to say it's a bad circuit board, but maybe there are separate receivers or transmitters.
     
  3. dj80d6

    dj80d6 New Member

    Joined:
    Feb 15, 2017
    18
    2
    0
    Location:
    sacramento
    Vehicle:
    2009 Prius
    Model:
    One
    well i bought it used and he said it hasn't worked for a while. also i only have one fob. and all the research i have done is the same they don't have one way problems like this.
     
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    how good are your diy capabilities?
     
  5. dj80d6

    dj80d6 New Member

    Joined:
    Feb 15, 2017
    18
    2
    0
    Location:
    sacramento
    Vehicle:
    2009 Prius
    Model:
    One
    not to bad if i have the time and tools
     
  6. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    it's probably overkill, but mini vci and a service manual would probably do it. but maybe you should pull the door panels first and have a look around.
     
  7. Abdulrehman2002

    Abdulrehman2002 New Member

    Joined:
    Dec 1, 2020
    1
    0
    0
    Location:
    Japan
    Vehicle:
    2011 Prius
    Model:
    N/A
    I have prius of 2011, i changed my navigation system, after that it has not locking or unlocking even from inside of the vehical! Not from the key too! Fuses are all good: can anyone help me?
     
  8. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    7,448
    3,751
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    Your car is a Gen 3 and you have posted in a Gen 2 forum.

    Maybe ask your question in one of the Gen 3 forums.