1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Calipers Paint

Discussion in 'Gen 3 Prius Accessories and Modifications' started by MMtec, Nov 2, 2017.

  1. MMtec

    MMtec Junior Member

    Joined:
    Jun 22, 2017
    48
    16
    0
    Location:
    Portugal
    Vehicle:
    2009 Prius
    Model:
    Prime Premium
    Good morning Priii's.
    Last night it was the time to paint the break calipers.
    The car is white so... I paint them black.
    1509624498374.jpg 1509624511263.jpg 1509624518754.jpg


    After a 4km ride to clean the ink in the discs, it looks great!

    1509624524520.jpg
    1509624630568.jpg

    Next step: paint the rims!
    The coating is start to come out.
    Suggestions are welcome.
    Paint Dip or Ink?
    Paint all(black or gun metal) or leave silver parts?
    don't know what to do....



    Ps: I don't disconect the 12v battery to disassemble the brake calipers.......PROBLEMS!!
    I open the driver's door with one caliper removed, the bomb starts to work and the piston comes out!! 0.5L oil out....

    Conclusion: have to purge the break.

    Next time I disconnect the 12v




    Posted via the PriusChat mobile app.
     
  2. Sam Spade

    Sam Spade Senior Member

    Joined:
    Dec 3, 2016
    2,036
    1,023
    0
    Location:
    USA
    Vehicle:
    2017 Prius c
    Model:
    Four
    Also "next time" you might NOT want to get paint on the rotors. If that paint gets embedded into the pads, you might be sorry later.
     
    MMtec likes this.
  3. MMtec

    MMtec Junior Member

    Joined:
    Jun 22, 2017
    48
    16
    0
    Location:
    Portugal
    Vehicle:
    2009 Prius
    Model:
    Prime Premium
    You have right.
    I forgot to put some tape on the discs.
    But before riding, I have passed sandpaper on the break work area to take out the ink excess but......isn't good work.
    Tanks for the advise

    Posted via the PriusChat mobile app.
     
  4. Starbrand

    Starbrand Senior Member

    Joined:
    Dec 17, 2014
    493
    1,502
    0
    Location:
    Westmont, IL
    Vehicle:
    2015 Prius
    Model:
    Two
    hope you used high heat enamel paint. when I did green, i used green 3000degree paint. but found out it chipped easily and lasted about 4-5 months before really chipping off. then when I did red (currently) i used regular gloss red spraypaint, but also put high heat clear gloss on first coat and on last. red is lasting a lot better and has been 6+ months now.

    I would do black plasti-dip on your wheels. I think it'd look great. at least 2 cans for all 4 so you have a few layers on. harder to peel off when only 2-3 layers on.

    next step, new drilled rotors in your future? I'm gonna change mine soon (at 58k miles at the moment. but i drive fairly aggressive).
     
    MMtec likes this.