1. Attachments are working again! Check out this thread for more details and to report any other bugs.

HELP!! NEW MEMBER; REAR BUMPER WHEEL WALL CLIP?????

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Rtrann9ball, Nov 16, 2017.

  1. Rtrann9ball

    Rtrann9ball New Member

    Joined:
    Nov 16, 2017
    3
    0
    0
    Location:
    Hacienda Heights
    Vehicle:
    2015 Prius
    Model:
    Four
    [​IMG] [​IMG] Heya fellow Prius owners!

    New member and first time poster!

    Just purchased a Certified 2015 White Prius 4 @ 20,090 Miles on it. Right off the bat noticed the REAR BUMPER WHEEL WALL SIDE SEAL CLIP was not clipping. Tried pushing back in but it's not clipping, just popping off. Took it back to the dealer TWICE, just got it back today, and same thing on both sides! PLEASE HELP WHAT'S THE PROBLEM? Is it the bumper? The side seal clip? Anything will help! THANK YOU!!!

    Ricky

    [​IMG]
    [​IMG]
     
  2. Rtrann9ball

    Rtrann9ball New Member

    Joined:
    Nov 16, 2017
    3
    0
    0
    Location:
    Hacienda Heights
    Vehicle:
    2015 Prius
    Model:
    Four
  3. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,474
    38,106
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Ours is similar. Passenger side, not too bad:

    IMG_8117.JPG

    Drivers side, worse:

    IMG_8119.JPG

    Had a serious impact on drivers side a few years back, and a parking lot brush a week or two back. It's going in for "bumper" touch up tomorrow.
     
  4. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,103
    4,032
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    Take back to dealer for them to get it str/aight. It's certified and paid higher for it so they need to find a permanent solution / fix for it, especially if it was a recent purchase.
     
  5. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,474
    38,106
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    They might eff it up in the process. I'm pretty sure ours were slightly off from the get go, and if it's the norm, what can they do? It looks to me like something that looked good on the drawing boards, not so good in practice.

    Maybe more 3rd gen owners can chime in, on how theirs look?

    This is purely cosmetic.