1. Attachments are working again! Check out this thread for more details and to report any other bugs.

KYB Strut/Shock Replacement (and Eibach Springs) - Now Noise

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Tyndall, Mar 19, 2018.

  1. Tyndall

    Tyndall Junior Member

    Joined:
    Jul 21, 2014
    14
    3
    0
    Location:
    NC
    Vehicle:
    2010 Prius
    Model:
    III
    I replaced the front struts with the KYB struts and Eibach springs this weekend. When I took off the OEM top hat and retainer ring I noticed a lot of grease. No instructions or videos said to put grease on the new KYB parts, so I put very little on each side. Now the right side squeaks slightly when I turn the wheel. Do I add more grease or wait a month to break it in?

    Also, I replaced the rear shocks with KYB shocks and Eibach springs. The right rear now makes a slight popping/thump noise over bumps. I know the springs are seated correctly. The bushings are all seated correctly. There’s no movement if I try to shake/move the shock, so it’s ataying in place. Any other ideas?

    Thanks!
     
    #1 Tyndall, Mar 19, 2018
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    660
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    with after market sounds are normal
     
    #2 tankyuong, Mar 19, 2018
  3. Tyndall

    Tyndall Junior Member

    Joined:
    Jul 21, 2014
    14
    3
    0
    Location:
    NC
    Vehicle:
    2010 Prius
    Model:
    III
    That doesn't seem like a quality part then...these are basically OEM parts (KYB)...o_O
     
    #3 Tyndall, Mar 19, 2018
  4. Tyndall

    Tyndall Junior Member

    Joined:
    Jul 21, 2014
    14
    3
    0
    Location:
    NC
    Vehicle:
    2010 Prius
    Model:
    III
    Soon found out what it was. The bottom bolt of the right shock was loose. The threads must be facing outward on that bolt, or else it may come loose.

    Overall, ride quality is stock. There’s still more body roll than I would like. Lowered stance looks good.
     
    #4 Tyndall, Mar 20, 2018
  5. tweedle99

    tweedle99 Member

    Joined:
    Feb 7, 2012
    98
    55
    0
    Location:
    Round Rock, TX
    Vehicle:
    2010 Prius
    Model:
    III
    I did the same thing and ending having to install rear sway bar to get rid of the body roll.
     
    #5 tweedle99, Mar 22, 2018
  6. Tyndall

    Tyndall Junior Member

    Joined:
    Jul 21, 2014
    14
    3
    0
    Location:
    NC
    Vehicle:
    2010 Prius
    Model:
    III
    Did you install the TRD rear sway bar?
     
    #6 Tyndall, Mar 23, 2018
  7. Lucifer

    Lucifer Senior Member

    Joined:
    Aug 23, 2015
    1,014
    485
    0
    Location:
    Nh
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    Get the costco bar, it's one piece, the trd is three piece, lots of energy lost.
     
    #7 Lucifer, Mar 23, 2018
  8. Tyndall

    Tyndall Junior Member

    Joined:
    Jul 21, 2014
    14
    3
    0
    Location:
    NC
    Vehicle:
    2010 Prius
    Model:
    III
    I'm not finding an links to purchase it. Seems juicedhybrid is no longer active?
     
    #8 Tyndall, Mar 23, 2018
  9. tweedle99

    tweedle99 Member

    Joined:
    Feb 7, 2012
    98
    55
    0
    Location:
    Round Rock, TX
    Vehicle:
    2010 Prius
    Model:
    III
    I bought TRD but for the Scion which is supposedly a little thicker. Comes in Red instead of White. If you search the forum, you can find the part no.
     
    #9 tweedle99, Mar 23, 2018
  10. tweedle99

    tweedle99 Member

    Joined:
    Feb 7, 2012
    98
    55
    0
    Location:
    Round Rock, TX
    Vehicle:
    2010 Prius
    Model:
    III
    i think for scion xB
     
    #10 tweedle99, Mar 23, 2018
  11. tweedle99

    tweedle99 Member

    Joined:
    Feb 7, 2012
    98
    55
    0
    Location:
    Round Rock, TX
    Vehicle:
    2010 Prius
    Model:
    III
    #11 tweedle99, Mar 23, 2018
    Tyndall likes this.
  12. Tyndall

    Tyndall Junior Member

    Joined:
    Jul 21, 2014
    14
    3
    0
    Location:
    NC
    Vehicle:
    2010 Prius
    Model:
    III
    I took care of the clunking in the back, so I still have squealing coming from the new KYB strut mounts it seems. Does anyone know if these came pre-greased or if I should have greased them? I verified the torque specs are right on the top 4 bolts this morning, so all good there.
    Thanks!
     
    #12 Tyndall, Mar 24, 2018
  13. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,198
    6,464
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    I would say that you should grease the same amount as the factory did when the original equipment struts were installed. It is customary to grease the strut mount bearings.

    I agree that the 3G factory repair manual is silent on that. However the 2G factory repair manual says to use multipurpose grease #2 and the illustration shows the grease packed to a depth about 1/2 of the way up the center large top strut nut.
     
    #13 Patrick Wong, Mar 24, 2018
    SFO likes this.
(You must log in or sign up to post here.)