1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Wireless Backup camera connection to the reverse wiring 2011 Prius

Discussion in 'Gen 3 Prius Accessories and Modifications' started by Jean Stoffel, Jan 26, 2017.

  1. Jean Stoffel

    Jean Stoffel New Member

    Joined:
    Jan 26, 2017
    2
    0
    0
    Location:
    California
    Vehicle:
    2011 Prius
    Model:
    Four
    Hi everyone, I purchased a Wireless Backup camera from Auto-Vox. It requires connection to the 12V power of the reverse wiring in my 2011 Prius. I am not sure which wire it is in the tail light (I took a pic). Has anyone done this? Please help me...
     

    Attached Files:

  2. Dylan Doxey

    Dylan Doxey Senior Member

    Joined:
    Mar 15, 2013
    1,389
    3,455
    92
    Location:
    San Diego, CA
    Vehicle:
    2014 Prius
    Model:
    Two
    The connector at the bottom is the reverse light. The white/black is (probably) negative, and you're looking for the positive which is (probably) the red/blue. I would tap in to the red/blue one.
     
    Jean Stoffel likes this.
  3. saltdiscus

    saltdiscus Member

    Joined:
    Oct 29, 2016
    198
    89
    0
    Location:
    US
    Vehicle:
    2014 Prius
    Model:
    Two
    You can do this 2 ways since I recently installed backup camera.One is to tap wire from driver side below the dash.pin 29 red wire which I found easy.Second is tap the red/blue for 12volt and any metal like screws for ground.
    Checkout the youtube video.

    Posted via the PriusChat mobile app.
     
  4. Jean Stoffel

    Jean Stoffel New Member

    Joined:
    Jan 26, 2017
    2
    0
    0
    Location:
    California
    Vehicle:
    2011 Prius
    Model:
    Four
    Thank you guys.
     
  5. neojohncarter

    neojohncarter New Member

    Joined:
    Jul 14, 2018
    1
    0
    0
    Location:
    New Jersey
    Vehicle:
    2011 Prius
    Model:
    II
    When you say, tap.. is it by scotch lock or by any other means? I am also looking to install a wireless backup camera on my 2011 prius II.
     
  6. Dylan Doxey

    Dylan Doxey Senior Member

    Joined:
    Mar 15, 2013
    1,389
    3,455
    92
    Location:
    San Diego, CA
    Vehicle:
    2014 Prius
    Model:
    Two
    There are many ways to do it. A clean and simple way is to use a t-tap connector like this.

    upload_2018-8-12_19-43-45.png