1. Attachments are working again! Check out this thread for more details and to report any other bugs.

C1377 - Capacitor Malfunction: possible that this code could lead to issues with brake accumulator?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by SRQ, Sep 4, 2018.

  1. SRQ

    SRQ Member

    Joined:
    Jan 25, 2013
    149
    53
    0
    Vehicle:
    2008 Prius
    Model:
    N/A
    Had this light come up with the other brake accumulator abnormal low pressure/leak lights. Seems like this is a fairly easy fix; check the fuses, then replace the module if that doesn't look good. However, since the issue says it's a Capacitor Malfunction, is it possible for me to order a replacement capacitor and just replace the faulty one via unsoldering the bad one and soldering in the replacement?
     
    #1 SRQ, Sep 4, 2018
  2. Dxta

    Dxta Senior Member

    Joined:
    Nov 7, 2016
    1,932
    766
    0
    Location:
    Lagos
    Vehicle:
    2008 Prius
    Model:
    II
    I think the capacitor eibg talked about is at the rear, close to the battery(12V)? That does sure with the braking system. If its bad, replace it. Have you checked all the fuses on that car? I had an experience with a Camry hybrid like that too. Turned out was a fuse that works inline with the brake capacitor.
     
    #2 Dxta, Sep 4, 2018
    SFO likes this.
  3. SRQ

    SRQ Member

    Joined:
    Jan 25, 2013
    149
    53
    0
    Vehicle:
    2008 Prius
    Model:
    N/A
    I haven't checked it yet but I will be soon. What am I looking for in the fuse? What I've been doing is visually inspecting the fuse and then using a fuse tester to ensure there's a connection.
     
    #3 SRQ, Sep 4, 2018
(You must log in or sign up to post here.)