1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Rear Bumper Question

Discussion in 'Gen 3 Prius Technical Discussion' started by Malosos, Sep 25, 2017.

  1. Malosos

    Malosos Member

    Joined:
    Oct 12, 2015
    109
    33
    0
    Location:
    Los Angeles
    Vehicle:
    2010 Prius
    Model:
    N/A
    The rear bumper to my 2010 sags a little on the passenger side corner, might need tightening somewhere or maybe something loose, anyone encounter this...see pic. FullSizeRender.jpg
     
    Burna J likes this.
  2. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,109
    4,038
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    Before buying my Prius, I spent 6 months test driving and inspecting gen 3s. The majority of rear bumpers gen 3s are like that, the least were 2012 and up. When I push down on them, it makes a loud pop as if it was broken in an accident.
     
    Malosos likes this.
  3. Burna J

    Burna J Knot Right Performance....

    Joined:
    Sep 18, 2012
    1,063
    3,331
    53
    Location:
    Long Beach, CA.
    Vehicle:
    2012 Prius
    Model:
    Three
    That's not bad at all... I've seen much worst. :)
     
    Malosos likes this.
  4. KennyGS

    KennyGS Senior Member

    Joined:
    Mar 28, 2014
    1,243
    1,044
    1
    Location:
    Keystone State
    Vehicle:
    2014 Prius
    Model:
    Five
    I'm guessing the rub mark on the edge of the bumper indicates that a contact with something was probably the cause.

    I would find instructions somewhere to remove and fix it.
     
    Malosos likes this.
  5. JimN

    JimN Let the games begin!

    Joined:
    Nov 26, 2006
    7,028
    1,116
    0
    Location:
    South Jersey
    Vehicle:
    2010 Prius
    Model:
    V
    The rear bumper cover is a scuff and scratch magnet. I wouldn't spend a lot of time or money on the corner, just brush on some touch up paint to cover the black plastic.
     
    Mendel Leisk likes this.
  6. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,109
    4,038
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    Personally I'd leave it alone and keep driving. But if begin to lose sleep, then I'll order item below:

     
  7. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,638
    38,198
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    The bumper on ours looks about the same. A minor design fail, when a "bumper" can't keep itself in place.
     
  8. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,109
    4,038
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    Where the bumper meets the rear light, there is that gap that is its widest. Then it narrows as the gap traces toward front of the car.
     
  9. Malosos

    Malosos Member

    Joined:
    Oct 12, 2015
    109
    33
    0
    Location:
    Los Angeles
    Vehicle:
    2010 Prius
    Model:
    N/A
    Bump...any other suggestions to remedy this?
     
  10. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,638
    38,198
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    We got a minor rear corner bump (speaking of bumps), and the body shop managed to tighten it up, which lasted for a few months, but again it's starting to sag, open up the gap. I just kinda ignore it.
     
    Malosos likes this.