1. Attachments are working again! Check out this thread for more details and to report any other bugs.

P3000 p0afa questions about ECU

Discussion in 'Gen 2 Prius Technical Discussion' started by Piro133a, Nov 4, 2018.

  1. Piro133a

    Piro133a Junior Member

    Joined:
    Nov 4, 2018
    20
    5
    0
    Location:
    Oregon
    Vehicle:
    2008 Prius
    Model:
    Two
    Hey guys,
    First off, thank you for any help and insight. I love how active this community is and how great some of the members are in contributing excellent information.
    I know this is a common error code to get. I'm pretty sure the HV battery has some bad cells. I bought the car, a 2008 prius with 125k miles for 1k$. The last owner had been working on it, had it running but let it sit for 8months due to family issues and other projects. He said he tried replacing a few of the packs inside with some he had bought on eBay. Didn't work and he gave up and sold it to me.

    So I get the P3000 P0afa code when I use my Bluetooth scanner and Dr. Prius app. No surprise there that the battery still has issues. I have reluctantly ordered a reman cardone from rockauto. Depending on the return process I may return it before I even open it up. I saw newpriusbatteries and it has me very interested.

    My questions:
    The Dr. Prius app shows voltages all over the place (see picture) sometimes negative even. Is this possibly a sign of a bad ECU? I have not taken out the HV battery to inspect wiring harness etc. For corrosion yet.
    I'm asking this because I really can't afford to get the newpriusbatteries set and pay for a new to me ecu.

    I'm thinking I may test the cardone battery to see if it revives the car and return it if it doesn't show good results in the Dr. Prius app...but only if I can return it if it's opened. How can I test the ECU though?


    I'm also thinking of getting a hobby charger (and light bulb) and recharging/discharging the packs to see if I can pull off a low budget miracle.

    Also....how many people have had success with newpriusbatteries product??? I read the whole 23pg thread and only saw one guy who documented his experience.

    I have been self studying IT certs for an enterprise job and working as a house manager at a small transitional housing organization for the homeless. I've never been homeless. It gave me free rent (and is a great cause) While I studied. So I have verrrrry little budget wiggle room.

    Thanks Again for listening and any advice.
     

    Attached Files:

    #1 Piro133a, Nov 4, 2018
    bisco likes this.
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,036
    49,114
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Welcome!

    If you can find or borrow an old compatible windows laptop, a copy of tech stream software for $25. Might be helpful to you
     
    #2 bisco, Nov 4, 2018
    Piro133a and Raytheeagle like this.
  3. Raytheeagle

    Raytheeagle Senior Member

    Joined:
    Jul 1, 2016
    11,251
    15,477
    0
    Location:
    Bay Area, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Plus
    My bet is that the connections aren’t tight and you’re not getting everything working together well.

    In addition to what @bisco said above, I’d pull the orange safety plug and open up the pack and see what you are dealing with.

    Good luck and keep us posted (y).
     
    #3 Raytheeagle, Nov 4, 2018
    Piro133a and bisco like this.
  4. padroo

    padroo Senior Member

    Joined:
    Jan 11, 2008
    2,763
    2,250
    13
    Location:
    Chesterton, Indiana Another third world country.
    Vehicle:
    2016 Prius
    Model:
    Four
    And Welcome to Prius Chat.
     
    #4 padroo, Nov 4, 2018
    Piro133a likes this.
  5. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,114
    5,823
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring
    Negative voltage readings are usually indicative of :
    1. a damaged wire or connector tab on the voltage sensor harness
    2. corrosion at the sensor harness plug terminals
    3. corrosion at the ecu plug where the voltage sensor wire harness plugs into
    Unfortunately, after 8 months of sitting, you may also have some modules that have self discharged. If you're able to check each modules voltage, it would at least give you a basic idea of where you're sitting in that regard. This would also give you opportunity to inspect the items mentioned above.
     
    #5 TMR-JWAP, Nov 4, 2018
    SFO, Skibob, Piro133a and 1 other person like this.
  6. 05PreeUs

    05PreeUs Senior Member

    Joined:
    Oct 1, 2016
    1,097
    563
    0
    Location:
    MSP
    Vehicle:
    2005 Prius
    Model:
    N/A
    Since you need to remove the pack and orange interconnect covers, you might as well just perform a capacity test on each module after confirming the nuts are properly torqued.
     
    #6 05PreeUs, Nov 4, 2018
    Skibob, Piro133a and Raytheeagle like this.
  7. Piro133a

    Piro133a Junior Member

    Joined:
    Nov 4, 2018
    20
    5
    0
    Location:
    Oregon
    Vehicle:
    2008 Prius
    Model:
    Two
    #7 Piro133a, Nov 4, 2018
  8. Hybrid Battery Exchange

    Hybrid Battery Exchange Member

    Joined:
    Nov 15, 2017
    66
    84
    0
    Location:
    Portland, OR
    Vehicle:
    2010 Prius
    Model:
    III
    This is the classic battery ECU/sensing harness issue.

    You need to address this ASAP before it gets worse and results in a burned out ECU, sensing cable and fully discharged modules on block 1,2 and maybe 3.
    20170608_153934.jpg
     
    #8 Hybrid Battery Exchange, Nov 5, 2018
(You must log in or sign up to post here.)