1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Another steering noise/clunk

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Metaleckz, Oct 24, 2018.

  1. Metaleckz

    Metaleckz Junior Member

    Joined:
    Oct 22, 2018
    23
    4
    0
    Location:
    San Francisco
    Vehicle:
    2010 Prius
    Model:
    II
    Hello!
    I just bought a 2010 prius and it drives like a dream. Except for the steering where it makes a sound. Here’s the video.

    Hopefully you guys can help me diagnose what needs to be replaced and it also makes the same sounds when i drive on bumpy roads
    Thanks!
     
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    659
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    Bad tie rods or intermediate shaft
     
    DogDaze likes this.
  3. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,836
    3,136
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    You're jerking it back and forth so fast you can't tell if the noise is because you are jerking back and forth quickly, or something else.
    Could be tie rod ends, usually that's what goes first, but a complete inspection is needed to find the bad part/parts.
     
  4. Metaleckz

    Metaleckz Junior Member

    Joined:
    Oct 22, 2018
    23
    4
    0
    Location:
    San Francisco
    Vehicle:
    2010 Prius
    Model:
    II
    Thanks for the reply. I will try the tie rods first and see

    Edit: inner or outer tie rods?
     
    #4 Metaleckz, Oct 25, 2018
    Last edited: Oct 25, 2018
  5. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,836
    3,136
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Yes..... The outers wear out quicker. You can grab the tie rod and pull it and push it. It should not move.
    I've never replaced they on a Prius, but did the inners on my town and country. They are pretty easy.
     
  6. adonturia

    adonturia Junior Member

    Joined:
    Mar 30, 2015
    14
    8
    0
    Location:
    españa
    Vehicle:
    2010 Prius
    Model:
    Four
    The same happens in my 2010.
    Replacing the intermediate shaft is not the solution. It is necessary to replace the steering column.
    I have learned to live with this noise.
     
    Fostel likes this.
  7. adonturia

    adonturia Junior Member

    Joined:
    Mar 30, 2015
    14
    8
    0
    Location:
    españa
    Vehicle:
    2010 Prius
    Model:
    Four
    Finally I found the reason for this noise:
    The cause is a washer that loosens. Many users put an additional spring, but it has not been necessary in my case. Just enlarge the wall and reinstall it.
    I can not post links yet. Send me a private message if you want more information
     
    Fostel, DogDaze and jack black like this.
  8. adonturia

    adonturia Junior Member

    Joined:
    Mar 30, 2015
    14
    8
    0
    Location:
    españa
    Vehicle:
    2010 Prius
    Model:
    Four
    Look at the links in this text file. Use the chrome translator.
     

    Attached Files:

    jack black likes this.
  9. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,836
    3,136
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    A washer doesn't loosen. Do you mean a nut, or bolt? It came loose and the washer was rattling around?