1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Hotchkis Sway Bar Owners/Installers, I need your help.

Discussion in 'Gen 3 Prius Accessories and Modifications' started by InspectorGadget, Sep 5, 2016.

  1. InspectorGadget

    InspectorGadget Active Member

    Joined:
    May 30, 2016
    216
    450
    0
    Location:
    Heber City, Utah
    Vehicle:
    2010 Prius
    Model:
    Five
    I have my car on jack stands to install my new Eibach springs and Hotchkis sways bars and I've run into an issue with the sway bar bushings. I'm thinking there should be a split in the bushing to facilitate getting it over the flattened end where the rear shock bolt and front end link attach, but they are solid. Am I supposed to muscle the bushing onto the bar somehow or do I need to cut the bushing.

    I hate it when stupid stuff like this gets in the way of an otherwise simple job.
     
    #1 InspectorGadget, Sep 5, 2016
    Montgomery likes this.
  2. granTORRESmo

    granTORRESmo Senior Member

    Joined:
    Jul 22, 2014
    237
    648
    0
    Location:
    Norcal
    Vehicle:
    2012 Prius
    Model:
    Two
    The trd rear sway bar bushing are cut so you just have to open them up and put on the sway bar. If your bushings are solid, then I would cut them :). Bushings are not suppose to be super tight anyways because the swaybar needs to rotate a little when driving the car. Make sure you lube the inside of the bushing where it grabs the sway bar.
     
    #2 granTORRESmo, Sep 5, 2016
  3. Montgomery

    Montgomery Senior Member

    Joined:
    Sep 11, 2015
    2,254
    2,234
    2
    Location:
    Orange County, CA
    Vehicle:
    2015 Prius
    Model:
    Two
    Yes, it's one of the reasons I am reluctant to put in a different head unit. Looks easy but I know there will be one cable, adapter or cuppler that one will have make work. Best of luck to you.
     
    #3 Montgomery, Sep 5, 2016
  4. m3pare

    m3pare Senior Member

    Joined:
    Jan 20, 2013
    679
    1,818
    0
    Location:
    SoCal (626)
    Vehicle:
    2012 Prius
    Model:
    Three
    Yep, you have to cut them.
     
    #4 m3pare, Sep 5, 2016
  5. InspectorGadget

    InspectorGadget Active Member

    Joined:
    May 30, 2016
    216
    450
    0
    Location:
    Heber City, Utah
    Vehicle:
    2010 Prius
    Model:
    Five
    Thank you!
     
    #5 InspectorGadget, Sep 5, 2016
    Dylan Doxey likes this.
  6. Jon Felder

    Jon Felder Junior Member

    Joined:
    Feb 1, 2016
    48
    5
    9
    Location:
    Dallas, TX
    Vehicle:
    2014 Prius
    Model:
    IV
    Did anyone who installed this use endlinks with the hotchkiss rear swaybar?
     
    #6 Jon Felder, Feb 7, 2019
  7. 04priusnow

    04priusnow Active Member

    Joined:
    Apr 30, 2013
    345
    201
    0
    Location:
    USA
    Vehicle:
    2010 Prius
    Model:
    II
    Hotchkis doesn't use endllinks. they bolt directly to lower shock mount using same bolt.

    PH-1 ?
     
    #7 04priusnow, Feb 8, 2019
    Bohemian Grove likes this.
(You must log in or sign up to post here.)