1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Used EV Battery: What to check for?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by eap904, Jan 16, 2019.

Page 2 of 2
  1. eap904

    eap904 New Member

    Joined:
    Jan 16, 2019
    12
    0
    0
    Location:
    Jacksonville, FL
    Vehicle:
    2006 Prius
    Model:
    Two
    11.6 with car off.

    This techstream software is more complicated and slow than I expected.

    Found
    P0A37 - Generator Temperature Sensor Circuit Range/Performance
    P0A93 - Inverter Cooling System Performance

    Both have x's under Current and History Columns. Car seems to start without error code after sitting for a while... possibly I put the car back together wrong... 12V battery isn't giving enough power to inverter blower fan...

     
    #21 eap904, Feb 20, 2019
    Last edited: Feb 20, 2019
  2. Skibob

    Skibob Senior Member

    Joined:
    Sep 14, 2018
    2,912
    1,496
    0
    Location:
    Northern California
    Vehicle:
    2006 Prius
    Model:
    N/A
    11.6 is also low. Could the voltage reading be off? Do you have a voltmeter to check the voltage with?
     
    #22 Skibob, Feb 20, 2019
  3. eap904

    eap904 New Member

    Joined:
    Jan 16, 2019
    12
    0
    0
    Location:
    Jacksonville, FL
    Vehicle:
    2006 Prius
    Model:
    Two
    yes, I do. I'll double check. Went ahead and bought a new battery, will install tomorrow and see if that fixes the issues.

    @edthefox5 where do I go in the techstream software to see all the hybrid battery voltages?
     
    #23 eap904, Feb 20, 2019
  4. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    7,510
    3,774
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    Actually 13.7 is ok, if the battery is fully charged. If it was running at 14.4 constantly I'd be more worried. Something is a bit wonky, if the OCV is 11.6 V when the car is off.
    Do the health check, the screen should look something like this (this is not a Gen 2; the Gen 2 will have fewer ECUs) with all the boxes yellow:

    Techstream Screen.png
    Double-click on the box that says Hybrid Control.

    You then want to click on to the Data List button in the left column. It should open to the HV Battery Control tab. It should look something like this:
    HV Battery Live screen.png

    My apologies if I have got the sequence wrong, I'm going by memory and I haven't had to use TS for a while. Hopefully there is enough info above to help you find your way.
     
    #24 dolj, Feb 21, 2019
    Last edited: Feb 21, 2019
    Skibob likes this.
(You must log in or sign up to post here.)
Page 2 of 2