1. Attachments are working again! Check out this thread for more details and to report any other bugs.

The two bendable connectors between hatch and body are called?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Behaines, Apr 8, 2019.

Tags:
  1. Behaines

    Behaines Junior Member

    Joined:
    Apr 8, 2019
    4
    3
    0
    Location:
    MD
    Vehicle:
    2007 Prius
    Model:
    N/A
    First I would like to thank the members here. I'm rebuilding a 2007 Prius with 152K. It had a lot of issues. Rear struts bad, module 28 in the pack was bad then balanced the pack, only one key so I did the dance, gummed hatch switch, coolant flow control valve, parasitic drain on the 12V, replaced passenger headlight assembly, both HID bulbs, both foglight assemblies, MFD, etc. Every issue a Gen 2 can have, this did. One issue is remaining. The dreaded water in the back. And nope, not a body frame crack issue, or under the black strip. No cracks found, but I did use silicone on everything just in case. The issue is with the 2 bendable rubber connectors from the body to the hatch. One carries windshield fluid, the other wiring. The previous owner ran a light bar through it.

    Would anyone know what they are called or a part number on them? ...And if a video exists showing their replacement? Windshield fluid line doesn't seem bad, I think I see the connector, but the wiring....that seems like another matter.
     
    #1 Behaines, Apr 8, 2019
  2. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,297
    4,237
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    Had no luck searching an online parts manual.

    It might be quicker if you hit up the parts counter at the dealer and asked them, or show them a similar part on another nearby car.
     
    #2 SFO, Apr 11, 2019
  3. Behaines

    Behaines Junior Member

    Joined:
    Apr 8, 2019
    4
    3
    0
    Location:
    MD
    Vehicle:
    2007 Prius
    Model:
    N/A
    Thanks. I did the same. Search parts manuals for the 2007, or any Gen2 version of the car. Oh well, looks like a trip to the dealer. That's for the effort!
    B
     
    #3 Behaines, Apr 15, 2019
  4. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,259
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    For the grommet with the washer hose, see parts catalog Figure 85-04, Rear Washer. The grommet, which is shown directly in the illustration, not in the listing by part name code, has Toyota part number 82819-40750. The same figure shows the other hose parts, in case you need them.

    For the grommet with wiring, see image 8 in parts catalog Figure 82-02, Wiring & Clamp. The grommet is sold as part of the No. 1 Back Door Wire [Harness], part number 82184-47060.

    In one eBay listing for the wire harness, the seller included a photo of the grommet itself, which is marked with part number 82819-47050, the same as the one for the washer hose.
     
    #4 Elektroingenieur, Apr 15, 2019
    Behaines and SFO like this.
  5. Behaines

    Behaines Junior Member

    Joined:
    Apr 8, 2019
    4
    3
    0
    Location:
    MD
    Vehicle:
    2007 Prius
    Model:
    N/A
    OK, so
    82184-47060
    and
    82819-47050
    (I tried to put links directly to Parts toyota and toyota parts deal, but I'm under the 4 post limit.)


    AWESOME!

    Thank you very much!

    Now I can finish up the combination meter replacement and then get the grommets wind wiring replaced! I might get this thing on the road by July! :)
     
    #5 Behaines, Apr 16, 2019
    Elektroingenieur likes this.
(You must log in or sign up to post here.)