1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Aftermarket Wheel Fitment Guidelines

Discussion in 'Prime Accessories and Modifications' started by Rob43, Apr 3, 2018.

  1. Drexo

    Drexo New Member

    Joined:
    Jul 16, 2019
    10
    1
    0
    Location:
    Toronto
    Vehicle:
    2019 Prius Prime
    Model:
    Plug-in Base
    Unfortunately can't order them to Canada
     
  2. rlk204

    rlk204 Junior Member

    Joined:
    Feb 4, 2018
    10
    6
    0
    Location:
    NJ
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    Thank you Rob. I think I am going to try the 3MM route first. Any recommened ones you have for that?

    I am running stock wheels for my 2017 prius prime so whatever the standard lugnuts come with it. Wasnt planning to change the lugnuts to install to the new used FRS wheels. Sorry dont have a pic right now since I am at work.
     
  3. Drexo

    Drexo New Member

    Joined:
    Jul 16, 2019
    10
    1
    0
    Location:
    Toronto
    Vehicle:
    2019 Prius Prime
    Model:
    Plug-in Base
    This is awesome. Thanks for posting these pictures with the exact weight. Did you have a chance to weight the stock tires/wheels?
     
  4. Rob43

    Rob43 Senior Member

    Joined:
    Sep 24, 2014
    1,373
    1,048
    0
    Location:
    VA, BMW Race Car, BMW R1200R, BMW 330Ci, Ford F350
    Vehicle:
    2013 Prius v wagon
    Model:
    Prime Advanced
    OK.

    So after thinking about your current aftermarket wheels, I believe that they should workout just fine for your application. The only slight concern I have is spreading a 215/45-17 tire over 8", it does fall within the published specs of the tire, but you will need to be VERY careful when parking because you don't want to "curb" your wheels. The up side is the tire gets maximum support, so handling will be at its pinnacle.

    A few things:

    1) You need 54.1 to 72.6 hub rings, these are cheap & will work perfectly:
    www.ebay.com/itm/4-Plastic-Hubcentric-Rings-54-1-54-Hub-to-72-6-72-56-Wheel-Hubrings/331286914375?hash=item4d223d2547:g:ftcAAOSw6xVcx1nC
    2) You will need a new set of 20 lug nuts with a 60 degree seat, your stock lug nuts won't work. I bought these Extended Length (ET) from DP Accessories & their quality is very good. (These are an example, don't buy them) www.amazon.com/gp/product/B00QLINUQQ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
    You shouldn't require "ET" lug nuts because I don't you'll need any type of wheel spacers, so buy the normal non-ET lug nuts. I WOULD CONTACT the wheel manufacturer to see if they recommend a "Tuner" (smaller diameter) lug nut.
    Regular width 60 degree seat: www.amazon.com/DPAccessories-D3116-HT-2305-20-Chrome-12x1-5/dp/B00H1IBKIK/ref=pd_cp_263_1?pd_rd_w=R54f0&pf_rd_p=ef4dc990-a9ca-4945-ae0b-f8d549198ed6&pf_rd_r=8HT30F4RYS2Z01DY9JSS&pd_rd_r=363ea177-a8d7-11e9-a213-f70688893b5a&pd_rd_wg=iEEMZ&pd_rd_i=B00H1IBKIK&psc=1&refRID=8HT30F4RYS2Z01DY9JSS
    "Tuner" (smaller diameter) width 60 degree seat: www.amazon.com/DPAccessories-LCS3A6HC2CH04020-Chrome-12x1-5-Aftermarket/dp/B00JNEBS64/ref=sr_1_1?keywords=DPAccessories+20+Chrome+12x1.5+Closed+End+ET+Spline+Tuner+Lug+Nuts&qid=1563398696&s=automotive&sr=1-1

    3) Tires: the DWS-06 is a great tire & I have personally recommended it to friends for years, BUT...
    Continental owns General Tire, General Tire came out with the AS-05 about 1 year after the DWS-06, the AS-05 is the same tire as the DWS-06 but with newer updates based on its release date. The General AS-05 is a true winner, not to mention a lot cheaper to buy than the DWS-06. I personally run the AS-05 on our 2013 Prius V & Prime. Conclusion, pick either of these great tires, Don't buy the General Altimax RT43 because it simply won't perform on the same level as the AS-05 or DWS-06.

    Recap: Call or Email the wheel manufacturer about the lug hole diameter, the linked lug nuts are 20mm & 22mm's in diameter with your needed 60 degree conical seat. Edit: if you can fit a standard 19mm socket into the lug holes, the 22.1mm lugs will work.


    Rob43
     
    #104 Rob43, Jul 17, 2019
    Last edited: Jul 17, 2019
  5. Rob43

    Rob43 Senior Member

    Joined:
    Sep 24, 2014
    1,373
    1,048
    0
    Location:
    VA, BMW Race Car, BMW R1200R, BMW 330Ci, Ford F350
    Vehicle:
    2013 Prius v wagon
    Model:
    Prime Advanced
    Yes, but first try this because it's pretty simple & effective:

    Take off one wheel & add a 3mm tall stack of 12 or 13mm Inside Diameter (ID) washers to 3 out of the 5 lug bolts in a triangle, these washers will simulate your 3mm thick spacers. Then re-mount your wheel & tighten the 3 lug bolts/nuts that have the washers, all you need is a mild (don't kill it) hand/wrench tightening. Now check if you have some clearance, if you get roughly 2 to 3mm's of clearance you should be good to go.

    I would buy #1 based on the price.
    1) 5x100, 57mm CB, 3mm Spacers, you need 2 sets, ~$16
    www.ebay.com/itm/2-Hub-Centric-Wheel-Spacers-3mm-5x100-57-1-57mm/333246757718?hash=item4d970dfb56:g:b3EAAOSwq05dEarI

    2) 5x100, 54.1mm CB, 3mm Spacers, you need 2 sets, ~$64
    www.amazon.com/gp/product/B01CLYZHGO/ref=ox_sc_act_title_1?smid=A1QFOTVL5TFT3C&psc=1

    3) Don't forget to buy those hub rings.


    Rob43
     
  6. Chuck Miller

    Chuck Miller New Member

    Joined:
    Jul 18, 2019
    10
    9
    0
    Location:
    San Diego, CA
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Advanced
    Have a 3 week old 2019 Prime Advanced in Magnetic Gray. Read through this and believe these wheels will work with OE tires and TPMS but would appreciate a confirmation.

    DRAG
    DR-69
    15 X6.5 5-100.00/114.30 40 offset BKMTXX (weight is 15.8 lbs) and I would need hub rings as the hub is 73. Did I miss anything?

    [​IMG]
     
  7. rlk204

    rlk204 Junior Member

    Joined:
    Feb 4, 2018
    10
    6
    0
    Location:
    NJ
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    I did not. Once i get the spacers and try again, I'll weigh them and send back.
     
  8. BigBilly

    BigBilly New Member

    Joined:
    May 16, 2019
    8
    8
    0
    Location:
    California
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    C481090F-040A-415B-AFD3-63ACD2ACEB4F.jpeg
    I have 18” drag dr 69 with the factory tpms installed with 225/40/18 and they are very close to factory diameter. You will love the look I get a lot of compliments
     
  9. Chuck Miller

    Chuck Miller New Member

    Joined:
    Jul 18, 2019
    10
    9
    0
    Location:
    San Diego, CA
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Advanced
    Those do look nice. Thanks for the pic.
     
    BigBilly and GTprii like this.
  10. GTprii

    GTprii Junior Member

    Joined:
    Apr 26, 2017
    27
    13
    0
    Location:
    Bay Area Cali
    Vehicle:
    2015 Prius
    Model:
    Persona
    anymore more pic of prime on 18”? i think 17” is too slow for this car
     
  11. GTprii

    GTprii Junior Member

    Joined:
    Apr 26, 2017
    27
    13
    0
    Location:
    Bay Area Cali
    Vehicle:
    2015 Prius
    Model:
    Persona
    Are you still on stock springs? or lower?
     
  12. Drexo

    Drexo New Member

    Joined:
    Jul 16, 2019
    10
    1
    0
    Location:
    Toronto
    Vehicle:
    2019 Prius Prime
    Model:
    Plug-in Base

    whats your experience with this setup and "new" fuel milage? and do you do mostly hw or city streets?
     
  13. BigBilly

    BigBilly New Member

    Joined:
    May 16, 2019
    8
    8
    0
    Location:
    California
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    Stock springs ,I haven’t lowered it yet but I plan on doing the RS-R soon
     
  14. BigBilly

    BigBilly New Member

    Joined:
    May 16, 2019
    8
    8
    0
    Location:
    California
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    I drive 120 miles round trip a day on freeway in HV. On the dash it shows I have lost about 8-10 miles mpg. I would normally go 4 days back and forth and fuel up on the fifth day with 1 bar left on the forth day. Now I still fill up on the fifth day but now I don’t have a full bar left.only about 1/2 a bar left.
     
    Drexo likes this.
  15. Rob43

    Rob43 Senior Member

    Joined:
    Sep 24, 2014
    1,373
    1,048
    0
    Location:
    VA, BMW Race Car, BMW R1200R, BMW 330Ci, Ford F350
    Vehicle:
    2013 Prius v wagon
    Model:
    Prime Advanced
    When you buy into the RS-R springs, can you please provide the PriusChat community with drop measurements ?

    This would only require a few minutes, you would take an accurate measurement from the center of the axle (center cap) up to the fender lip on each wheel while your Prime sits on a flat surface.


    Rob43

    53.jpg
     
    BigBilly and GTprii like this.
  16. ryhi

    ryhi Junior Member

    Joined:
    Dec 24, 2018
    2
    3
    0
    Location:
    SGV
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    New shoes!
    Weds Leonis Navia 01 (15.2 lbs)
    17x7 +47
    Hankook Ventus V2 Concept2 (21 lbs)
    215/45R17
    McGard SplineDrive lugnuts

    IMG_20190803_113003.jpg IMG_20190803_113011.jpg
     
    GTprii, Mark57 and Rob43 like this.
  17. Rob43

    Rob43 Senior Member

    Joined:
    Sep 24, 2014
    1,373
    1,048
    0
    Location:
    VA, BMW Race Car, BMW R1200R, BMW 330Ci, Ford F350
    Vehicle:
    2013 Prius v wagon
    Model:
    Prime Advanced
    ^ They Look Great !

    I bet they feel awesome compared to the horribly "floaty" OE 195/65-15's, I know my 205/50-17's completely transformed our Prime.

    If you ever want to add spacers, I found the perfect 5x100 / 5.2mm hub centric (54.1 to 73.1) spacers. You'd need to buy new ET spline lug nuts to make them work properly, total cost is about ~$105 shipped for both.


    Rob43
     
  18. rlk204

    rlk204 Junior Member

    Joined:
    Feb 4, 2018
    10
    6
    0
    Location:
    NJ
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    Finally got some time to mount the Frs wheels and weigh the stock ones. See pics.

    @Rob43 - thanks for all your help. Wound up being able to use the 3mm spacers and it was enough clearance. I would say about 1.5-2mm clearance from calipers and i test drove it around and didnt seem to have any problems. Not loving the stock lugs and how they look on the wheels but will likely change them later.
     

    Attached Files:

    ConfusedBirdie, Rob43, Drexo and 2 others like this.
  19. Drexo

    Drexo New Member

    Joined:
    Jul 16, 2019
    10
    1
    0
    Location:
    Toronto
    Vehicle:
    2019 Prius Prime
    Model:
    Plug-in Base
    It looks great!! thanks for the OEM weight that is great information to have!
     
  20. Rob43

    Rob43 Senior Member

    Joined:
    Sep 24, 2014
    1,373
    1,048
    0
    Location:
    VA, BMW Race Car, BMW R1200R, BMW 330Ci, Ford F350
    Vehicle:
    2013 Prius v wagon
    Model:
    Prime Advanced
    You are very welcome.

    ~2mm's is close, I ran a car a long time ago with about the same clearance, they would slightly touch on harder turns. If you get any noise from your setup, the easiest thing to do is dab some paint on the brake caliper where you think they're touching. Once you establish the exact rubbing spot, hand file about 1mm off the caliper, this should give you what you need in clearance.

    Did you get about ~8 turns of lug nut engagement with your new 3mm spacers ?


    Rob43