1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Replacing o-ring on air assembly

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by bmparent, Sep 15, 2019.

  1. bmparent

    bmparent Member

    Joined:
    Aug 15, 2014
    159
    65
    0
    Location:
    barre ma
    Vehicle:
    2007 Prius
    Model:
    N/A
    Hi Prius folks,
    Firstly, I don't know the correct name of the part. It's the O-ring that's on the hose that leads into the air assembly, you know, the box with the air filter. Is that the air assembly? Anyway I want to take it out so I can clean the throttle body, but I'm sure if I take the screw out that's on the o-ring, it's going to break. The car is running pretty well for 165,000 but I thought it would be a good time to clean the TB and MAF to try and keep things running smoothly. Do you think there's a generic clamp I can use, or should I go for the same type? So far the only one I've found is on ebay in this link:

    Toyota OEM Air Intake-air Hose Clamp 9611110880 for sale online | eBay
     
  2. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,253
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    O rings are usually made of rubber, but from your description, I think you’re referring to the hose clamp, made of metal, that connects the engine intake air hose (no. 1 air cleaner inlet) to the air filter housing (air cleaner assembly). As shown in parts catalog Figure 17-03, Air Cleaner, this has Toyota part number 96111-10630.
    The list price for a new clamp is $4.60, so it’s probably not worth finding an aftermarket alternative.
     
    Skibob and bmparent like this.
  3. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,198
    6,461
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    If you need to use a generic clamp you could do so.
     
    bmparent likes this.
  4. bmparent

    bmparent Member

    Joined:
    Aug 15, 2014
    159
    65
    0
    Location:
    barre ma
    Vehicle:
    2007 Prius
    Model:
    N/A
    Thanks for the link! That's the one. Hose clamp for air filter housing. I'll buy a real one.
     
    Elektroingenieur likes this.