1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Windshield wiper cover on OEM blades

Discussion in 'Gen 3 Prius Main Forum' started by SpeedDemon, Nov 27, 2019.

  1. SpeedDemon

    SpeedDemon Junior Member

    Joined:
    Aug 17, 2016
    24
    10
    0
    Location:
    Los Angeles
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I'm replacing the wipers for the first time on my 2015 Prius...the OEM wiper blades have a nice aerodynamic looking plastic shell around them vs my generic Bosh replacement blades look very plain.

    Does anyone know if the plastic shell on the OEM wipers can be removed or is it attached to the OEM wiper blades?

    Thanks!
     
    #1 SpeedDemon, Nov 27, 2019
  2. Siward

    Siward Active Member

    Joined:
    Aug 7, 2014
    296
    124
    10
    Location:
    Toronto
    Vehicle:
    2012 Prius
    Model:
    Three
    Below is a video of changing the OEM wiper blade inserts. Watching this should explain how the OEM wiper gets removed.


    There are generally 3 different types of wiper blade frames. There is

    1) beam/frameless
    2) hybrid (which is the Toyota Prius OEM),
    3) framed/convectional.

    Bosch manufacturers all 3 types of wiper blade frames, so I don't know which one you are comparing it to. Here are the Bosch wiper types:
    Windshield Wipers | Bosch Auto Parts

    The "shell" frame is called the hybrid frame. Bosch's version of hybrid frame is the Bosch Insight:
    [​IMG]

    You can put any of the 3 frame types on the Prius. It is just a different technology and pricing. You will find the more expensive ones tend to perform better.

    Replacing it for the first time? It would be cheaper to simply buy the rubber wiper insert from the dealer and follow the above video than to replace the whole wiper frame. Some Toyota dealerships are even nice enough to install the rubber insert for free.
     
    #2 Siward, Nov 28, 2019
    Last edited: Nov 28, 2019
    Bay Stater and Ed Beaty like this.
  3. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,673
    38,213
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Are the OEM rubber inserts hard to get now? Not sure why that would be btw. I believe these are the parts numbers for the front, not sure which is which:

    85214-68020 - RUBBER, WIPER
    85214-30390 - RUBBER, WIPER

    (Amayama has them, for one.)
     
    #3 Mendel Leisk, Nov 28, 2019
  4. SpeedDemon

    SpeedDemon Junior Member

    Joined:
    Aug 17, 2016
    24
    10
    0
    Location:
    Los Angeles
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Thank you Siward and Mendel. I had to buy some aftermarket Bosch blades with a cheap looking outer shell since I was in a pinch and had to prep my car for a 700 mile round trip with a lot of rain. Luckily I saved my OEM hybrid frames (shell) so when these cheapo's go bad, I can get some Toyota OEM rubber replacements.
     
    #4 SpeedDemon, Dec 3, 2019
    Mendel Leisk likes this.
(You must log in or sign up to post here.)