1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Battery low + brake ABS traction lights

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Air0ne, Jan 20, 2020.

  1. Air0ne

    Air0ne Junior Member

    Joined:
    Aug 30, 2014
    12
    7
    0
    Location:
    Montréal
    Vehicle:
    2010 Prius
    Model:
    N/A
    Hi there,

    A week ago, after a day of rain, I got brake (yellow and red), traction and ABS light ON. As I figured out that the fuses cover was not well closed, I checked some of the fuses related to ABS and 2 or 3 days later, the lights went OFF.

    2 ago, the lights came back so I checked my battery voltage. I got 11,93v cold (minus 20 degrees) and 12,35v after my ride to the subway (10 km long).

    Is the battery the problem?

    Thx for your help guys
     
  2. Ed Beaty

    Ed Beaty Active Member

    Joined:
    Jul 13, 2018
    334
    309
    0
    Location:
    Salt Lake City
    Vehicle:
    2010 Prius
    Model:
    IV
    "Is the battery the problem?"

    Very likely. How old is it. Even a post-drive 12.37 is marginal to poor; 11.93 resting...a goner.
     
    dig4dirt likes this.
  3. dig4dirt

    dig4dirt MoonGlow

    Joined:
    Apr 6, 2012
    1,150
    741
    0
    Location:
    Lancaster Co PA
    Vehicle:
    2014 Prius c
    Model:
    Two
    Yep, time to replace. If original (10 years), no more questions, your honor.
     
    Ed Beaty likes this.
  4. Air0ne

    Air0ne Junior Member

    Joined:
    Aug 30, 2014
    12
    7
    0
    Location:
    Montréal
    Vehicle:
    2010 Prius
    Model:
    N/A
    In that case, why is there no specific light for the battery? Back in time, it was common to have those lights no?
     
    mjoo likes this.
  5. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,111
    4,039
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    Also were engine temp read outs, battery voltage reading, oil pressure levels and etc.
     
  6. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,693
    48,945
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    a mistake by toyota, i think gen 4 gives a warning.
     
  7. mjoo

    mjoo Senior Member

    Joined:
    Nov 9, 2016
    1,107
    1,311
    12
    Location:
    Michigan
    Vehicle:
    2010 Prius
    Model:
    III
    Toyota saving $1 per car

    Pixel XL ?
     
  8. Air0ne

    Air0ne Junior Member

    Joined:
    Aug 30, 2014
    12
    7
    0
    Location:
    Montréal
    Vehicle:
    2010 Prius
    Model:
    N/A
    Battery swapped. Lights gone. Looks like it was the battery folks!
     
    Raytheeagle, dig4dirt and bisco like this.
  9. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,693
    48,945
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Well done!(y)
     
  10. Priuslover09

    Priuslover09 Member

    Joined:
    Jan 9, 2020
    365
    48
    0
    Location:
    Dc
    Vehicle:
    2009 Prius
    Model:
    ----USA----
    Hi
     
  11. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,693
    48,945
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    hello!
     
    dig4dirt and Priuslover09 like this.
  12. Air0ne

    Air0ne Junior Member

    Joined:
    Aug 30, 2014
    12
    7
    0
    Location:
    Montréal
    Vehicle:
    2010 Prius
    Model:
    N/A
    Hi there,

    With my new battery, the voltage is 12.58. Is it normal or is the garage tried to give me a refurbished one? What a brand new battery is supposed to give me?
     
  13. Air0ne

    Air0ne Junior Member

    Joined:
    Aug 30, 2014
    12
    7
    0
    Location:
    Montréal
    Vehicle:
    2010 Prius
    Model:
    N/A
    Ok... Lights are ON and OFF so I bought a scanner. I got C1238 / C1253 and C1466. When I went to the mechanic, he told me that my rear Left wheel was jammed and that the brake needs to be cleaned.

    Can I have your opinion guys?

    Thx
     
  14. dig4dirt

    dig4dirt MoonGlow

    Joined:
    Apr 6, 2012
    1,150
    741
    0
    Location:
    Lancaster Co PA
    Vehicle:
    2014 Prius c
    Model:
    Two
    Those codes point to wheel speed sensor and other related parts.

    I would plan on getting brake lube and looksee done, perhaps other brake work if needed
    the mechanic sounds like he is correct.

    Pay attention to the rear brake caliper slide pins too. they tend to rust up on the rear for Gen3
     
  15. Air0ne

    Air0ne Junior Member

    Joined:
    Aug 30, 2014
    12
    7
    0
    Location:
    Montréal
    Vehicle:
    2010 Prius
    Model:
    N/A
    Hi guys,

    The rear right wheel bearing was dead and needed to be changed. No more errors on the dashboard so far.

    Fingers crossed

    Thx guys