1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Anyone installed Sony XAV-AX1000?

Discussion in 'Gen 3 Prius Audio and Electronics' started by us_matrix, Sep 26, 2019.

  1. us_matrix

    us_matrix Member

    Joined:
    Dec 28, 2010
    110
    10
    0
    Location:
    California
    Vehicle:
    2010 Prius
    Model:
    II
    I have a 2010 Gen 3 base model no NAV and no JBL. Planning to upgrade to Apple Carplay and found this on Crutchfield and is one of the least expensive well known brand offers Carplay. They selling with the dash kit
    Scosche TA2105B Dash Kit, steering wheel control unit iDatalink Maestro ADS-MSW and wiring harness (One from new unit and one from the car.
    Here is my questions. Is there any other wiring or modification I have to do other than those they provided? I read from other thread saying about need to connect to ODBII for installing after market Audio. Is that true?
    Regarding the steering wheel control unit, it is $50 but the what else I will able to control other than volume to the Apple carplay since i have the base model?

     
    #1 us_matrix, Sep 26, 2019
  2. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,888
    3,159
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    You're link just goes to the dash kit, not the radio....
     
    #2 ASRDogman, Sep 26, 2019
  3. Leadfoot J. McCoalroller

    Leadfoot J. McCoalroller Senior Member

    Joined:
    May 12, 2018
    6,788
    6,447
    1
    Location:
    Pennsylvania
    Vehicle:
    2018 Prius c
    Model:
    Two
    I installed its cousin, the AX-100 in our Prius c.

    From the steering wheel we can control volume, track skip forward and back, and change audio source between usb/am/fm etc.

    I had to do some extra wiring work to retain use of our car’s built in rear vision camera, and I chose to do some extra work to integrate the Sony handsfree microphone into the car. I mounted it in the factory handsfree mic location overhead.

    I never had to do anything with OBDII.
     
    #3 Leadfoot J. McCoalroller, Sep 26, 2019
  4. Bobulator

    Bobulator Junior Member

    Joined:
    Nov 29, 2018
    14
    3
    0
    Location:
    Atlanta
    Vehicle:
    2010 Prius
    Model:
    III
    Did you buy the optional steering wheel control unit, or did it work as is for the steering wheel controls?
     
    #4 Bobulator, Mar 21, 2020
  5. Bobulator

    Bobulator Junior Member

    Joined:
    Nov 29, 2018
    14
    3
    0
    Location:
    Atlanta
    Vehicle:
    2010 Prius
    Model:
    III
    Did you pull the trigger on this unit? If so, how did it go? I'm thinking about the same unit. Did you have to buy the extra kit to use your steering wheel controls?
     
    #5 Bobulator, Mar 21, 2020
  6. Leadfoot J. McCoalroller

    Leadfoot J. McCoalroller Senior Member

    Joined:
    May 12, 2018
    6,788
    6,447
    1
    Location:
    Pennsylvania
    Vehicle:
    2018 Prius c
    Model:
    Two
    I used the Axxess ASWC module. It's a universal converter but it came out of the box preset properly and included an appropriate harness for the car. All I had to do was physically mount it and connect it, no configuration or programming. It just worked.
     
    #6 Leadfoot J. McCoalroller, Mar 21, 2020
(You must log in or sign up to post here.)