1. Attachments are working again! Check out this thread for more details and to report any other bugs.

ABS actuator replacement

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by gjkristi, May 10, 2016.

  1. gjkristi

    gjkristi Junior Member

    Joined:
    May 10, 2016
    24
    7
    0
    Location:
    Minnesota
    Vehicle:
    2010 Prius
    Model:
    Four
    I have a 2010 Prius and according to Toyota the ABS actuator is bad for a tune of 4000.00 dollars parts and labor. I have a rear sensor error and the cruise control will not work( I believe because of the ASB not working). I can get a used one for under 200.00. Is there a way a person can do this at home? I have worked on cars all my life and am quite handy. I under stand that you need a scan tool to bleed it after replacement but have seen some people bleed by doing it manually by turning system into maint. mode. If someone is knowledgeable on this or has done this on a gen 3 I would like to hear your advise. Thanks Gregg
     
    #1 gjkristi, May 10, 2016
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    660
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    1st step is to get fotga techstream and cord from ebay
     
    #2 tankyuong, May 11, 2016
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,796
    48,996
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    mini vci and an old windows laptop. ^^^
     
    #3 bisco, May 11, 2016
  4. gjkristi

    gjkristi Junior Member

    Joined:
    May 10, 2016
    24
    7
    0
    Location:
    Minnesota
    Vehicle:
    2010 Prius
    Model:
    Four
    Thanks for the reply. The techstream is needed to bleed the brakes after actuator replacement?
     
    #4 gjkristi, May 11, 2016
  5. CR94

    CR94 Senior Member

    Joined:
    Dec 2, 2014
    2,642
    1,134
    0
    Location:
    Northwestern S.C.
    Vehicle:
    2011 Prius
    Model:
    Two
    According to the service manual, there's a non-techstream way.
     
    #5 CR94, May 11, 2016
  6. gjkristi

    gjkristi Junior Member

    Joined:
    May 10, 2016
    24
    7
    0
    Location:
    Minnesota
    Vehicle:
    2010 Prius
    Model:
    Four
    There are a lot of VIC mini techstreams out there does it matter which one or certain version?
     
    #6 gjkristi, May 11, 2016
  7. gjkristi

    gjkristi Junior Member

    Joined:
    May 10, 2016
    24
    7
    0
    Location:
    Minnesota
    Vehicle:
    2010 Prius
    Model:
    Four
    Cr94 have you ever bled brakes using this method? I have seen this on youtube and looks like it should work
     
    #7 gjkristi, May 11, 2016
  8. CR94

    CR94 Senior Member

    Joined:
    Dec 2, 2014
    2,642
    1,134
    0
    Location:
    Northwestern S.C.
    Vehicle:
    2011 Prius
    Model:
    Two
    No I haven't, by either method. Still trying to decide whether to attempt changing the fluid myself as I have on normal cars, or be a coward and have the dealer do it. Somewhere on this site there's a post with a pdf attachment of the relevant section of the official service manual.
     
    #8 CR94, May 11, 2016
  9. Former Member 68813

    Former Member 68813 Senior Member

    Joined:
    Oct 3, 2010
    3,524
    981
    8
    Location:
    US
    Vehicle:
    Other Hybrid
    Model:
    N/A
    there is a sticky with youtube video on bleeding without TIS.
     
    #9 Former Member 68813, May 11, 2016
  10. NutzAboutBolts

    NutzAboutBolts Senior Member

    Joined:
    Mar 5, 2013
    1,476
    1,551
    0
    Location:
    Bay Area
    Vehicle:
    2012 Prius
    Model:
    Four
    It's actually quite easy to bleed the brakes manually :)
     
    #10 NutzAboutBolts, May 12, 2016
  11. gjkristi

    gjkristi Junior Member

    Joined:
    May 10, 2016
    24
    7
    0
    Location:
    Minnesota
    Vehicle:
    2010 Prius
    Model:
    Four
    Replaced the Actuator and now have many codes c1203,c1392,c1364,c1345,c1247,c1246 I think it needs to have the actuator bleed. I do not know if the manual bleed will fix this. I have ordered a techstream and will have to wait to bleed it.
     
    #11 gjkristi, May 13, 2016
  12. gjkristi

    gjkristi Junior Member

    Joined:
    May 10, 2016
    24
    7
    0
    Location:
    Minnesota
    Vehicle:
    2010 Prius
    Model:
    Four
    Thanks everyone, All is good I bleed the ABS ECU with the techstream software which was a little tricky but got it done.
     
    #12 gjkristi, May 21, 2016
    Moronical likes this.
  13. gjkristi

    gjkristi Junior Member

    Joined:
    May 10, 2016
    24
    7
    0
    Location:
    Minnesota
    Vehicle:
    2010 Prius
    Model:
    Four
    You can only bleed the ABS thru the techstream software (or similar software).can't do it manually.
     
    #13 gjkristi, May 21, 2016
    tankyuong and NutzAboutBolts like this.
  14. NutzAboutBolts

    NutzAboutBolts Senior Member

    Joined:
    Mar 5, 2013
    1,476
    1,551
    0
    Location:
    Bay Area
    Vehicle:
    2012 Prius
    Model:
    Four
    Glad to know and glad I bought one lol
     
    #14 NutzAboutBolts, May 21, 2016
  15. James Analytic

    James Analytic Member

    Joined:
    Jun 14, 2019
    163
    26
    3
    Location:
    Michigan
    Vehicle:
    2006 Prius
    Model:
    N/A
    Did you wind up buying a Mini VCI and if so, vers 1.4 or 2.0?

    Also, what version of techstream did you use and what computer?

    Any suggestions regarding which MiniVCI to invest in?
     
    #15 James Analytic, Sep 23, 2020
  16. NutzAboutBolts

    NutzAboutBolts Senior Member

    Joined:
    Mar 5, 2013
    1,476
    1,551
    0
    Location:
    Bay Area
    Vehicle:
    2012 Prius
    Model:
    Four
    I bought one but never used it.
     
    #16 NutzAboutBolts, Sep 24, 2020
    James Analytic likes this.
(You must log in or sign up to post here.)