1. Attachments are working again! Check out this thread for more details and to report any other bugs.

wipers for 2015 prius III

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by H.S., Oct 7, 2020.

Tags:
  1. H.S.

    H.S. Junior Member

    Joined:
    Apr 24, 2015
    93
    19
    0
    Location:
    Venice, ca
    Vehicle:
    2015 Prius
    Model:
    Three
    hello
    I am researching the size of window wipers I need to replace for my front which are 26" and 19"
    the one that is throwing me off is the rear one- I read that it should be 16" or 16a - which is the accurate size for the reason wipers?

    also should I just changed the blade or the whole wiper?

    thank you
     
  2. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,903
    3,167
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    I don't know the difference with the "a" added. Maybe the design?
    But it's 16 inches. You only need to replace the blade.
    You can to pull it in the center away from the arm so you can pull the blade out.
    Not too difficult...
     
    H.S. likes this.
  3. Georgina Rudkus

    Georgina Rudkus Senior Member

    Joined:
    Sep 15, 2018
    3,125
    2,182
    0
    Location:
    Taylors, SC
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
  4. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,114
    4,040
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    It could be for French Canadians such as “nice looking car & great wheels-a”.
     
  5. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,903
    3,167
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Thanks! Now it makes sense! :)

    I just buy the least expensive 16 inch blade and remove the insert.

     
  6. H.S.

    H.S. Junior Member

    Joined:
    Apr 24, 2015
    93
    19
    0
    Location:
    Venice, ca
    Vehicle:
    2015 Prius
    Model:
    Three
    so there is no piont to switch out the whole top just the blade on all?
     
  7. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,903
    3,167
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    No, you don't have too. It depends on how much you want to spend.
    It's not that much work at all...

     
  8. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,491
    14,100
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    If you still have the original wiper arms, the best deal I've found in my 50 years of driving is the blade inserts at Toyota. They're about $9 each and last at least three years. I still have the originals on my 2017 with 46,000 miles. Only reason I know the cost is from replacing the expensive auto parts store ones on previous Prii.
     
    Mendel Leisk and pjksr02 like this.
  9. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,903
    3,167
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    My rear blade is 3 years, 2 months and 7 days. And still going... :)
    $3 at walfart....

     
    jerrymildred likes this.
  10. Georgina Rudkus

    Georgina Rudkus Senior Member

    Joined:
    Sep 15, 2018
    3,125
    2,182
    0
    Location:
    Taylors, SC
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    On my Prius v, my OEM blade lasted 8 years. I replaced it with this silicone blade. If one is available for the regular Prius, I'd get one and forget about it for at least 5 years.



     
  11. H.S.

    H.S. Junior Member

    Joined:
    Apr 24, 2015
    93
    19
    0
    Location:
    Venice, ca
    Vehicle:
    2015 Prius
    Model:
    Three
    thank you all for the great responses. any tutorial videos you recommend to change the INSERTS for front and rear wipers since I already have the arms?
     
  12. Ed Beaty

    Ed Beaty Active Member

    Joined:
    Jul 13, 2018
    334
    309
    0
    Location:
    Salt Lake City
    Vehicle:
    2010 Prius
    Model:
    IV
    "...tutorial videos you recommend to change the INSERTS for front and rear wipers."

    Brought to you by the estimable NutsAboutBolts.
     
  13. NewHybridOwner

    NewHybridOwner Active Member

    Joined:
    Nov 21, 2018
    607
    279
    0
    Location:
    W. Michigan
    Vehicle:
    2015 Prius
    Model:
    Four
    I forget the details now, but I'm pretty sure that not all blades and inserts are interchangeable.

    Update: Looking back at earlier posts (including my own) in other threads, I see that Toyota dealers are no longer selling the original blades for which replacement inserts were available. They now sell the "SightLine" wipers, which have to be replaced as a whole unit.

    The original (except for the Toyota name, perhaps) Denso blades are available on Amazon, but the inserts did not last long. Inserts bought separately are fine in those Denso arms.
     
    #13 NewHybridOwner, Oct 8, 2020
    Last edited: Oct 8, 2020
  14. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,903
    3,167
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    The rear wiper arm on MY 2010 Prius, is a standard wiper.
    So, I bought a standard wiper attachment, and removed the blade.
    And installed on the rear wiper arm. Been working good for over 3 years.
    Pretty good for $3 or $4!
     
  15. pjksr02

    pjksr02 Active Member

    Joined:
    Nov 2, 2009
    532
    225
    2
    Location:
    Connecticut
    Vehicle:
    2010 Prius
    Model:
    III
    The wiper refills are the way to go, if you can get them. But, if you're ordering parts online, there is also a Denso rear wiper blade that is a direct fit for many Toyotas (this fits my 2010 Prius and 2018 Sienna): Denso rear blade, 160-5516. The metal wiper parts are recyclable as scrap metal.
     
  16. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,710
    38,247
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I changed our OEM inserts (with same) around the nine year mark.

    They didn't really need changing, judging from appearance, but I figured the rubber must be hardening up some.
     
    jerrymildred likes this.
  17. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,491
    14,100
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    Cool! I never found any that I liked. Seem like wipers were always more of an issue for me than I thought they should be.
     
  18. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,903
    3,167
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    I've bought all the major brands, and some that said they were better.
    But they didn't really seem to work any better or longer then getting the least expensive
    once. Or whatever was on sale.
    I use Rain-X on my windshield so it doesn't really matter... at least not to me.
     
  19. RubikTetris

    RubikTetris New Member

    Joined:
    May 24, 2023
    6
    0
    0
    Location:
    Montreal
    Vehicle:
    2013 Prius
    Model:
    N/A
    I just bought a used gen 3 and the previous owner foolishly replaced the OEM blades with some cheap BOSCH ones. I am trying to find OEM blades with no luck. By any chance do you know where I could get some? Or any other decent alternative? Thanks.
     
  20. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,710
    38,247
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Ask a dealership parts department.
     
    jerrymildred likes this.