1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Tips on washing 3rd Gen Engine Bay?

Discussion in 'Gen 3 Prius Main Forum' started by TheGrayt1, Oct 19, 2020.

  1. TheGrayt1

    TheGrayt1 Junior Member

    Joined:
    Mar 1, 2020
    48
    20
    0
    Location:
    Plano, TX
    Vehicle:
    2007 Prius
    Model:
    Five
    Just got my 2010 Prius IV and want to clean the engine up as it looks as if it has never been touched since new. I am nervous of spraying water on a hybrid with all the electronics though. What is the safe way to do this? I heard all purpose cleaner on a warm engine and let it sit for 15 mins then spray light pressure water on the entire engine. Is that right? Are there any areas I should protect with plastic or foil? I have an electric 1700 psi pressure washer, should I use that with light spray far away from the engine or just use a garden hose with a spray nozzle?
     
    #1 TheGrayt1, Oct 19, 2020
  2. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,114
    4,040
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    Can’t wait for all the replies on this subject!
     
    #2 Grit, Oct 19, 2020
  3. sam spade 2

    sam spade 2 Senior Member

    Joined:
    Mar 31, 2018
    7,035
    2,782
    0
    Location:
    USA
    Vehicle:
    2017 Prius c
    Model:
    Four
    What you should do is........NOTHING......that involves water anyway.
    If you MUST do something, blow it off with a leaf blower or an air compressor.......and then close the hood and don't worry about it.
     
    #3 sam spade 2, Oct 19, 2020
    Majafamily and tvpierce like this.
  4. tvpierce

    tvpierce Senior Member

    Joined:
    Apr 27, 2015
    949
    879
    2
    Location:
    Maine
    Vehicle:
    2013 Prius v wagon
    Model:
    Five
    +1

    My tip would be to not wash it at all.

    But if it really bothers you, search on YouTube. There are a few with some suggestions for protecting some areas.
     
    #4 tvpierce, Oct 20, 2020
    Mendel Leisk likes this.
  5. GFO

    GFO Member

    Joined:
    Sep 24, 2015
    67
    47
    0
    Location:
    Larkspur
    Vehicle:
    2012 Prius
    Model:
    Two
    I'd not hose down any modern engine with water, let alone a hybrid, you probably won't do anything if you're careful, but the downside could be you fry something and you're now looking at an expensive repair. Last engine I hosed down for a cleaning was a 1964 Cadillac DeVille and that was 20ish years ago. But that engine was simple with VERY few electronics. I think all I did was put a plastic bag around the distributor and coil and I did this to clean the engine before starting repairs/service because it had 35+ years of grease and grime building up.

    If you're doing the cleaning for cosmetics/vanity on the Prius, get yourself a good cleaner (eg Simple Green) and some clean rags, spray the rag with the cleaner and then wipe down the dirty areas like the engine vanity cover, fuse lid, air cleaner etc. Do not spray the cleaner directly inside the engine bay. Cheers!
     
    #5 GFO, Oct 20, 2020
(You must log in or sign up to post here.)