1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2010 Prius’s mileage going South

Discussion in 'Gen 3 Prius Fuel Economy' started by Norryboy1a, Feb 2, 2020.

  1. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,470
    38,103
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I like to have engine bay underpanel off too, and front raised enough that you can crawl under. Also drain 2 quarts of coolant from radiator (into clean container), will avoid any spill when cooler is disconnected from coolant hoses. Pour back into reservoir (with vent open or topmost hose disconnected) after all is reassembled.
     
    Raytheeagle and pjksr02 like this.
  2. Xterra72

    Xterra72 Senior Member

    Joined:
    Oct 20, 2013
    1,361
    1,635
    0
    Vehicle:
    2013 Prius
    Model:
    Persona
    Any automotive shops perform the EGR cleaning in Northern California?

    I have not found one yet.
     
  3. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,103
    4,032
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four

    So when does one disconnect the 12v battery cable then?
     
  4. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,470
    38,103
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    This one didn't, no problems.
     
  5. Norryboy1a

    Norryboy1a Junior Member

    Joined:
    Feb 14, 2019
    80
    24
    0
    Location:
    Pennsylvania
    Vehicle:
    2010 Prius
    Model:
    III
    Well, I had planned on actually doing it by removing the wiper motor cowling anyway. And I am aware that its really needed. It’s just that I’m really don’t have the time right now to get to it. Plus I don’t have access to a garage to do it in. But it’s on the list. Thanks for the advice.
     
    Mendel Leisk likes this.
  6. Norryboy1a

    Norryboy1a Junior Member

    Joined:
    Feb 14, 2019
    80
    24
    0
    Location:
    Pennsylvania
    Vehicle:
    2010 Prius
    Model:
    III
    I had also thought about disconnecting the 12 volt when I did the egr cleanup because I was afraid that if I didn’t it might throw a code. I also did some research on testing the resistance on the solenoid on the one that I thought of replacing the old one with. Seems to be in spec. But not sure if it might be any cleaner or not. Just was thinking of washing out the old one with some carb solvent or something and reinstalling it.