1. Attachments are working again! Check out this thread for more details and to report any other bugs.

ABS & Traction lights on and off

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by JarrettOriginal, Dec 3, 2020.

  1. JarrettOriginal

    Joined:
    May 4, 2015
    116
    81
    0
    Location:
    North Hollywood
    Vehicle:
    2010 Prius
    Model:
    IV
    Driving through winding canyons and up and over the Hollywood Hills today,
    my ABS went out and the regenerative brake with it.
    Definitely stressful, but still could stop.

    After parking for an hour, drove her on straight & flat roads, the ABS & all came back, as if nothing had happened.

    Then went away again while going back over the hills and came back again after being parked for a a few hours.

    I don't have an OBDII reader that can access ABS.

    With it being intermittent, does a faulty sensor seem reasonable?

    I just changed all the brakes myself a few weeks ago, but didn't mess with the sensors at all.

    +5mpg for posting
     
  2. AzusaPrius

    AzusaPrius Senior Member

    Joined:
    May 27, 2020
    1,639
    766
    0
    Location:
    California
    Vehicle:
    2010 Prius
    Model:
    IV
    Try and clean them if you can.
    Yes this is what happens and you will eventually have to replace a speed sensor and if you dont then you will get your hybrid battery weak and get more lights than you want.

    Posted via the PriusChat mobile app.
     
  3. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    5,837
    3,137
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
  4. JarrettOriginal

    Joined:
    May 4, 2015
    116
    81
    0
    Location:
    North Hollywood
    Vehicle:
    2010 Prius
    Model:
    IV
    My driver's side front speed sensor had broken open and wires were exposed...
    Yikes.

    Easy replacement fix.

    +5mpg for posting
     
  5. pjksr02

    pjksr02 Active Member

    Joined:
    Nov 2, 2009
    532
    225
    2
    Location:
    Connecticut
    Vehicle:
    2010 Prius
    Model:
    III
    It is possible to read the ABS codes without a scanner, by jumpering 3-14 on the OBD port. Count the flashes...