1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Dirty engine oil on sparkplug thread.

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Moses Bruh, Jun 30, 2020.

  1. Moses Bruh

    Moses Bruh Member

    Joined:
    Dec 20, 2018
    97
    29
    0
    Location:
    California
    Vehicle:
    2008 Prius
    Model:
    Four
    08, 163k miles, oil eater.
    Changed out to new spark plugs and pcv valve following a recent oil change, noticed just #2 sparkplug well had old oil inside. Took the sparkplug out the threads are covered but the tip looks fine, any thoughts? I just threw new plugs in and everything feels about the same. Not sure if this matters but the #2 sparkplug ignition boot also was looser compared to the other 3, in terms of its not gripping the sparkplug as tight, but im not sure if that would affect the contact points, as i dont have any warning lights.
     

    Attached Files:

    #1 Moses Bruh, Jun 30, 2020
  2. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,286
    4,226
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    You might need a new valve cover gasket, etc.

    Sounds like the rubber boot may have swollen from sitting in oil.
     
    #2 SFO, Jun 30, 2020
    Raytheeagle likes this.
  3. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,795
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    Really common for valve cover gasket to fail on a 4 banger at the spark plug wells. It leaks into the sparkplug wells and if real bad fouls the cop.
    Mine failed at 110,000 miles. With the valve cover off take advantage of that and remove and replace the pcv valve using a box end wrench or deep socket only.

    Go to the dealer buy the pcv valve and gasket take the valve cover off and replace the gasket. You have to apply some RTV along the front edge.

    Take some pictures of the valve train and post here please I like pictures.
     
    #3 edthefox5, Jun 30, 2020
  4. Atharmiac

    Atharmiac New Member

    Joined:
    Jan 11, 2021
    3
    0
    0
    Location:
    TX
    Vehicle:
    2008 Prius
    Model:
    N/A
    I am having the same issue but could you explain or link in more simple terms? Mine had enough oil on it it was dripping when I took it out. This new valve cover gasket is that something easy to replace that you can do at home? This is what mine looked like. I had two like this, the two furthest to the right when facing the front of the car.
    Could you link a tutorial or explain and is it ok to put the new ones in still? 71DF3495-B5F8-4899-8082-E0208A8BB293.jpeg 71DF3495-B5F8-4899-8082-E0208A8BB293.jpeg
     
    #4 Atharmiac, Jan 11, 2021
(You must log in or sign up to post here.)