1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Intake cam 13050-0T050

Discussion in 'Prius v Technical Discussion' started by D70, Jul 19, 2020.

  1. D70

    D70 New Member

    Joined:
    Jul 19, 2020
    1
    0
    0
    Location:
    Ca
    Vehicle:
    2013 Prius
    Model:
    Three
    Has anyone installed the latest intake vvt cam 13050-0T050? Do I need to do anything with this pin in the front?
     

    Attached Files:

  2. The Critic

    The Critic Resident Critic

    Joined:
    Oct 28, 2005
    3,193
    2,315
    0
    Location:
    CA
    Vehicle:
    2011 Prius
    Model:
    Three
    I installed that cam gear when I did my head gasket job.
    If I recall correctly, the cam gear is installed and torqued. The process is pretty self-explanatory once you go to do it. After the bolt is torqued, you will then turn the cam gear to "lock" the gear in place.
     
    Raytheeagle likes this.
  3. johnnychimpo

    johnnychimpo Active Member

    Joined:
    Aug 21, 2007
    511
    109
    0
    Location:
    Monterey
    Vehicle:
    2010 Prius
    Model:
    Three
    I changed my head gasket but my cams slipped out of position any Idea on how I can set them up right?
    I know I need the cylinder closest to the chain at TDC and both cams for this cylinder need to point up ish to close the valves for TDC.
    this sound right can you point me in the right direction???