1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Car Wash and putting car in Neutral

Discussion in 'Prime Main Forum (2017-2022)' started by Sid786, Dec 11, 2017.

Tags:
  1. Mark57

    Mark57 2021 Tesla Model 3 LR AWD

    Joined:
    Aug 14, 2009
    2,945
    2,735
    0
    Location:
    OK
    Vehicle:
    Other Electric Vehicle
    Model:
    N/A
    Same here. I've used a track wash 3 times now. It takes 30 seconds to cycle through and turn off all the "gripy" sensors. Throw it in neutral and get clean. Turn them back on after the dry down. No dead batteries, no griping sensors, just a clean car.

    This is just not a big deal.
     
  2. Matthew Cook

    Matthew Cook New Member

    Joined:
    Aug 25, 2019
    1
    0
    0
    Location:
    Atlanta GA
    Vehicle:
    2011 Prius
    Model:
    III
    I have two Prius’. One is a 2007 and one is a 2011. Both have had the problems of the battery dying in the car wash when having it in neutral. Now I only go to the car wash that has the drive in a park and touchless sprayer. Not as good of a wash but it was sure scary when both vehicles turned off and I had trouble getting them started again. I’d avoid these track style car wash places.
     
  3. eroeder

    eroeder Junior Member

    Joined:
    Oct 14, 2011
    72
    22
    0
    Location:
    Dallas
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Advanced
    I don't have an issue now when I put in neutral at the car wash, I just temporarily disable the sensors function in the menu. :)
     
    Merkey likes this.
  4. GoneTooFar

    GoneTooFar New Member

    Joined:
    Mar 4, 2021
    2
    0
    0
    Location:
    Ohio
    Vehicle:
    2019 Prius
    Model:
    XLE AWD-e
    I disable PKSB and PCS and it still beeps all the way through the car wash.

    What else do I have to disable to make it stop?
     
  5. Northerner

    Northerner Active Member

    Joined:
    Feb 26, 2020
    120
    103
    0
    Location:
    Midwest
    Vehicle:
    2020 Prius Prime
    Model:
    Limited
    Glad this came up as I failed miserably at this today. I thought I shifted into neutral but must have done something wrong. The car moved into the car wash faster than the track wanted it to. I got the “Break!” signal and so hit the breaks and tried for neutral again. In the flurry of beeping and flashing alarms - I wasn’t sure what was moving me through the wash. I was breaking and letting my foot off the break at a fast pace that felt OK, still trying to shift to neutral, but it didn’t feel quite right. Somehow the car came through clean and without damage - but I was angry at myself for thinking I could figure it out on the fly.... again. (2020 Prime Limited)
     
  6. GoneTooFar

    GoneTooFar New Member

    Joined:
    Mar 4, 2021
    2
    0
    0
    Location:
    Ohio
    Vehicle:
    2019 Prius
    Model:
    XLE AWD-e
    You have to hold the shifter in the neutral position for a beat before it'll take.

    I usually pull over before I get in line for the car wash to make sure I have time to disable PKSB and PCS ... but doing that doesn't stop the beeping, so what else do I have to do?
     
  7. PT Guy

    PT Guy Senior Member

    Joined:
    Nov 23, 2016
    1,080
    708
    0
    Location:
    Washington, the state
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    Or double-tap the shifter into N.

    Let it beep. It's not a problem. A couple of years ago certain washes would activate the brakes on certain Primes. A software upgrade from the dealership fixed that. My 2017 Prime never had a problem in the wash. Hold the shifter in N for a second, let it go, let the chain pull the car through the Tunnel o' Suds. Let it beep. At the end when the green light flashes shift to D and drive out.
     
    pghyndman likes this.