1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Replacement Center Dash Panel

Discussion in 'Generation 1 Prius Discussion' started by 3prongpaul, Nov 28, 2012.

  1. 3prongpaul

    3prongpaul Hybrid Shop Owner, worked on 100's of Prius's

    Joined:
    Jul 18, 2010
    954
    716
    1
    Location:
    Boulder Hybids, Boulder, CO
    Vehicle:
    2006 Prius
    Model:
    N/A
    If you remove the Gen1 center dash panel for any reason it will most likely break...it seems the plastic has gotten brittle with age and it can crumble when removed. I've noticed this starting to happen a lot in the last year or so.

    FYI; new replacements can be ordered from the dealer.
    Part number 55405-47030-B0
    Not cheap...dealer List Price is $203.25 online sellers will be cheaper...

    [​IMG]

    [​IMG]
     
  2. bwilson4web

    bwilson4web BMW i3 and Model 3

    Joined:
    Nov 25, 2005
    27,067
    15,372
    0
    Location:
    Huntsville AL
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    When mine was removed to install a satellite radio, the cheezy plastic inserts broke and had to be 'plastic welded' back on. So I have held off on going there.

    Have you given any thought to some better way to attach the facia?

    Bob Wilson
     
  3. depriusoto

    depriusoto Member

    Joined:
    Jul 23, 2007
    113
    17
    0
    Location:
    Albuquerque, NM
    Vehicle:
    2002 Prius
    Model:
    N/A
    Thanks for this info!
     
  4. zfenty

    zfenty New Member

    Joined:
    Aug 17, 2013
    4
    0
    0
    Location:
    San Diego, CA
    Vehicle:
    2001 Prius
    Model:
    N/A
    learned this today breaks like crazy. lol
     
  5. bwilson4web

    bwilson4web BMW i3 and Model 3

    Joined:
    Nov 25, 2005
    27,067
    15,372
    0
    Location:
    Huntsville AL
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    Thanks, I just ordered a replacement from AutoNation, $175 delivered. The original fascia has cracks and the driver-side, vertical louvers were so loose I put a 'paper shim' (Ok, spit wad!) to hold it. The tabs had been 'plastic welded' in the past when we added Satellite radio . . . which we no longer use. The cassette deck no longer takes an adapter so I've been just listening to podcasts with the iPhone in my pocket.

    Obviously this will be a good time to do some repairs and/or replacements. So questions are in order:
    • Can the CD be removed or will I always get an error like the "No CD in player" that shows up now?
    • How many of the audio devices can I remove or will I get error messages each time the car starts?
    • Are removal of any audio devices likely to result in an immobilizer issue?
    • Suggested replacements?
    I am thinking about putting a socket in and running the MFD signals and power to a loop-back connector near the glove box. This would allow me to tinker with the signals and not have to take the fascia off and on. One bad day of soldering and heat shrinking and the access problem is solved. I'll also put in a similar setup for the engine controller, ICE temperature probe.

    Thoughts? Suggestions?

    Bob Wilson
     
  6. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    23,072
    14,975
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I shot this video back in August of removing the center panel, but only now got around to editing it for a hosting service. Caveat, the panel in the vid is newer than an original one from 2001-3, so it might still not be this easy, but I wanted to post just in case technique has anything to do with it and maybe some breakages can be avoided.



    (In case the video embed feature in the forum software gives trouble, here's a direct link.)

    -Chap
     
    #6 ChapmanF, Nov 22, 2014
    Last edited: Nov 22, 2014
  7. Hipstor

    Hipstor Junior Member

    Joined:
    Feb 5, 2019
    11
    6
    8
    Location:
    Las Vegas, NV
    Vehicle:
    2013 Prius
    Model:
    Two
    Hey bwilson4web, couple suggestions.

    If your tape adapter won't work. Try a Bluetooth to FM adapter instead. There are several currently available for less than $20. Here is one example I picked at random.

    I bought mine (different make/model) at Walmart. Works pretty good for playing music and podcasts from my phone.

    If you want to remove the CD player from the Gen 1 Prius. I think you can just pull the player and pass-thru cable from the dash. Then plug the harness that previously plugged into the pass-thru directly into the radio. And the radio shouldn't even care. Unless you press the Disk button on the dash. Haven't actually tried this though.

    I have driven my 2003 Prius with the center dash torn apart. No radio, no CD, no touchscreen, not even any ac/heater controls. No problems with immobilizer.
     
  8. AlienMartian

    AlienMartian New Member

    Joined:
    Sep 7, 2021
    6
    2
    0
    Location:
    Tulsa
    Vehicle:
    2001 Prius
    Model:
    I

    11 years since this post and its still not any cheaper!
     
  9. nimblemotors

    nimblemotors Re Member

    Joined:
    Oct 13, 2010
    115
    35
    0
    Location:
    Sacramento
    Vehicle:
    2002 Prius
    I followed the advice in that video, and removed one of mine without breaking it.
    These cars show up in the picknpull now (gen2 also), and so you can go there to get one (though I see some are also broken..)
    I made a custom one for my daughters car, was lots of work, but looked kinda cool, definitely different.
    Good luck with your gen1. :)
     
  10. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    23,072
    14,975
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Pics?