1. Attachments are working again! Check out this thread for more details and to report any other bugs.

HYBRID BATTERY WARNING

Discussion in 'Prius c Care, Maintenance and Troubleshooting' started by Ercelle labry, Nov 6, 2021.

  1. Ercelle labry

    Ercelle labry New Member

    Joined:
    Nov 6, 2021
    11
    3
    0
    Location:
    Giam
    Vehicle:
    2012 Prius c
    Model:
    N/A
    Hi guys. First time posting. I have a 2015 Prius C. Got the famous triangle hybrid warning. Purchased TorquePro and found the following related to the battery. After removing and disassembling the batter, I found some corrosion BUT all the battery modules tested at 8 volts. Not one was below 7.9 v. I cleaned, reassembled and installed the the battery. No error for now BUT still shows voltage issues. Not sure if it's the harness or voltage sensors? Just asking is anyone has had this similar problem or might offer some insight. I have posted a picture of the voltage.
    Thanks beforehand for any info.

    Please see picture for reference
     

    Attached Files:

  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    if you're not getting a trouble code, you're good to go
     
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    23,064
    14,970
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    If the triangle comes back, be sure to get the trouble codes. Then you'll know whether it's a hybrid battery warning or a warning about something else entirely.
     
  4. Ercelle labry

    Ercelle labry New Member

    Joined:
    Nov 6, 2021
    11
    3
    0
    Location:
    Giam
    Vehicle:
    2012 Prius c
    Model:
    N/A
    Thanks guys for responding. Unfortunately I only drove it for 2 days and the same error appeared. Code: P0A80 and the same voltage numbers as previously shown. Any ideas?
     
  5. Ercelle labry

    Ercelle labry New Member

    Joined:
    Nov 6, 2021
    11
    3
    0
    Location:
    Giam
    Vehicle:
    2012 Prius c
    Model:
    N/A
    Got the P0A80 code again. My confusion is why the battery numbers are so out of wack but when I check each module they are all are around 8v? Any ideas?
     
  6. Sonic_TH

    Sonic_TH Active Member

    Joined:
    Mar 18, 2020
    513
    81
    7
    Location:
    Puerto Rico
    Vehicle:
    2012 Prius c
    Model:
    One
    What is the voltage difference? try using Dr. Prius App.
     
  7. Ercelle labry

    Ercelle labry New Member

    Joined:
    Nov 6, 2021
    11
    3
    0
    Location:
    Giam
    Vehicle:
    2012 Prius c
    Model:
    N/A
    Thanks for the response. The strange thing is that from banks 1-10 the voltage is fairly the same. Then completely strange for 11-14. The voltage goes as follows:
    Bank 1: 16.1
    Bank 2: 16.1
    Bank 3: 16.0
    Bank 4: 16.1
    Bank 5: 16.1
    Bank 6: 16.2
    Bank 7: 16.1
    Bank 8: 16.1
    Bank 9: 16.0
    Bank 10: 16.0
    Bank 11: 54.0
    Bank 12: 2.0
    Bank 13: -0.3
    Bank 14: -0.3
    Could it be a wiring harness or voltage distributor that is malfunctioning? I removed the battery and tested every cell and they test between 7.8 and 8v. Even the cells from modules 11-14. Any help will be very appreciated. THanks again for your response.
     
  8. Sonic_TH

    Sonic_TH Active Member

    Joined:
    Mar 18, 2020
    513
    81
    7
    Location:
    Puerto Rico
    Vehicle:
    2012 Prius c
    Model:
    One
    Is there corrosion in the connections? Also i think that the voltage changes significantly in the bad modules when there is load on them, if you can test them with a small light bulb, around 5W i think is what people use.
     
    Ercelle labry likes this.
  9. vvillovv

    vvillovv Senior Member

    Joined:
    Mar 19, 2013
    3,492
    1,231
    1
    Location:
    NY
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    The C has only 10 blocks / 20 modules. When you checked each module, how many individual module readings did you have? Try DrPrius to compare with the readings you got with torque. They may be the same or similar showing the funny readings for blocks 11 -14. It would be nice to confirm if DrPrius also gives strange readings for blocks 11 - 14 like torque when connected to the C.
     
    Ercelle labry likes this.
  10. Ercelle labry

    Ercelle labry New Member

    Joined:
    Nov 6, 2021
    11
    3
    0
    Location:
    Giam
    Vehicle:
    2012 Prius c
    Model:
    N/A
    Thanks vvillovv. After looking at DrPrius and simply paying attention I was able to figure out that there are only 10blocks and not the 14 being shown. There are 2 blocks that not functioning correctly. Even though they manually test at 8v I'm guessing they will fail a load test. Will update after the weekend. Thanks so much for your comments and suggestion.
     
    vvillovv, Sonic_TH and bisco like this.