1. Attachments are working again! Check out this thread for more details and to report any other bugs.

My gosh, are the front fender liners really this big?

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Purrius, Sep 25, 2022.

  1. Purrius

    Purrius Junior Member

    Joined:
    Apr 20, 2020
    58
    16
    2
    Location:
    Northeastern US
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    My 2010 is currently in the shop, but I ordered these beforehand and they just came in. They look way too large, but I can't compare them to the car so I don't know if they actually are?

    Here's the auction screenshot and the auction.
    Here's the photo of mine (please excuse the clutter, ps3 controller for scale).
    These are the part numbers that were listed

    Partslink Number:
    TO1228168
    TO1248158
    TO1249158

    Is it just me?
     
    douglasjre likes this.
  2. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,842
    3,099
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    I don't know where the Xbox controller is going to go, but the fender liner looks good.

    I recently installed a new front fender liner on my 2016 Toyota Corolla S plus, and it pretty much looks the same.

    Make sure that you get all of the assorted fasteners that are needed.

    Posted via the PriusChat mobile app.
     
  3. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    10,775
    4,372
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    Yes, it's just you... But then again I never play video games?
     
  4. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    7,797
    1,349
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    You good clips included
     
    Purrius likes this.
  5. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,479
    38,106
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    @Purrius you should be able to post pics directly in the thread, with the “Upload a File” button.

    The wheel well liner is a long, convoluted piece, with an odd, shop-bolted bar splice near the front. Requires maybe 15 fasteners, and there’s one near the back that’s pretty much impossible to remove without destroying it.
     
    #5 Mendel Leisk, Sep 25, 2022
    Last edited: Sep 25, 2022
    Purrius likes this.
  6. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,103
    4,032
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    I wouldn’t buy anything for until your head gasket gets replaced.
     
  7. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    10,775
    4,372
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    Do you ever re-read what you wrote to make sure it actually makes sense? Of do you not care about making sense?
     
    mikey_t likes this.
  8. Purrius

    Purrius Junior Member

    Joined:
    Apr 20, 2020
    58
    16
    2
    Location:
    Northeastern US
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    I mentioned in the post, I'd already ordered these before the issues came up.
     
    Raygon likes this.
  9. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    7,797
    1,349
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    Yep I'm saying. you good clips included. Ready to go . Install .they that big. See wen ya remove .
     
  10. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    10,775
    4,372
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    Just in case you didn't know... What you wrote makes no sense at all. You are NOT being helpful at all.
     
    mikey_t likes this.
  11. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    7,797
    1,349
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    Yeah otay.
     
  12. Purrius

    Purrius Junior Member

    Joined:
    Apr 20, 2020
    58
    16
    2
    Location:
    Northeastern US
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    I understood what you meant, which I feel like is all that really matters, as it was in response to my post. So no worries, mate.
     
  13. douglasjre

    douglasjre Senior Member

    Joined:
    Sep 13, 2008
    1,743
    613
    0
    Location:
    Orlando, FL
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    Always use all new fasteners all the way around without exception. I generally expect the holes to be damaged and I use oversized lock pen designed body fastener kits. I buy a big box of them and I drill all holes oversized to accommodate the new fasteners. Be absolutely certain that you have fixed the front portion incredibly well because it is notorious for catching air getting pulled down and trapped under the front tire which guarantees the entire wheel liner rips out again
     
  14. Purrius

    Purrius Junior Member

    Joined:
    Apr 20, 2020
    58
    16
    2
    Location:
    Northeastern US
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    You were all correct, the parts fit if even with a bit of tight fitting and a tiny bit of after market drilling. Thank you kindly, and I mean it. <3
     
    PriusCamper and Mendel Leisk like this.
  15. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    10,775
    4,372
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    "after market drilling" for underbody panels is always way easier than all the fools who spend a fortune on OEM fastners that are more of a hassle than a convenience.