1. Attachments are working again! Check out this thread for more details and to report any other bugs.

using front tow mounts for a big light-bar ?

Discussion in 'Gen 3 Prius Accessories and Modifications' started by judoman09, Jan 3, 2023.

  1. judoman09

    judoman09 Junior Member

    Joined:
    Mar 8, 2020
    22
    3
    0
    Location:
    Coffs Harbour
    Vehicle:
    2009 Prius
    Model:
    N/A
    Prius gen 3 has two front towing mounts. It seems to me they would be a very sturdy place to mount big light bar. Anyone foresee problems with this, or seen this done before? (I know I would need fashion up some drop-down bracket for the license plate, which is right in the middle.)

    I am thinking to either of these:

    1. iJDMTOY No Drill Front Bumper Tow Hook License Plate Mounting Bracket Adapter Kit Compatible with 13-17 Scion FRS, 13-21 Subaru BRZ & 15-21 WRX, 10-15 Toyota Prius & 17-21 86 : Amazon.com.au: Automotive

    (however there are a few reviews of it coming loose, which obviously would be no good. Hopefully the 2nd mounting point will help reduce wiggling, and I could use Lock-tite glue on the threads)

    2.The Tow Hook Camera Mount for 2010-2015 Toyota Prius

    (this is probably a better quality mount. I see a bigger fixing at the end, and it's made for a precious go-pro. cost a bit more though.
     
  2. w84me

    w84me Active Member

    Joined:
    Mar 25, 2015
    142
    224
    16
    Location:
    Sacramento
    Vehicle:
    2015 Prius
    Model:
    Two
    judoman09 likes this.
  3. SnowMexicanuck

    Joined:
    Oct 28, 2019
    53
    64
    0
    Location:
    Quebec, Canada
    Vehicle:
    2015 Prius
    Model:
    Base
    For a much lower price, you could easily make something out of scrap steel.
     
  4. judoman09

    judoman09 Junior Member

    Joined:
    Mar 8, 2020
    22
    3
    0
    Location:
    Coffs Harbour
    Vehicle:
    2009 Prius
    Model:
    N/A
    Thanks, can you describe the project more?
    How would you get the properly threaded posts?
     
  5. SnowMexicanuck

    Joined:
    Oct 28, 2019
    53
    64
    0
    Location:
    Quebec, Canada
    Vehicle:
    2015 Prius
    Model:
    Base
    Grab two tow hooks from cars at a scrapyard, cut the hook part and make the end flat, drill the flat ends on both former tow hooks and tap it for whatever thread size bolts you'll be using.

    Buy a fairly thick flat steel wide enough so that you can make it contour the bumper and still be able bolt the lightbar to it.

    Put a bolt in the end of the hooks and use that to screw them on the car.

    Make or buy 90° brackets (keep in mind that flimsy 90° brackets without reinforcements can shake and break over time if there's weight on it), bolt them to the threaded tow hooks, bolt the flat steel on it, install the light and wire it up.

    Depending on the lenght of the light bar, you could even skip the flat steel part and bolt it directly to the 90° brackets if the light backets are lining up with the tow hooks or if you use a different kind of brackets that allows for adjustments. I don't know the actual distance between the tow hooks, so finding a light with the exact lenght might not be possible.

    But that's how I'd do it. You'd basically need a vice, a drill, a set of taps, a grinder and a flat sanding disc (wearing protective glass otherwise OSHA will show up and curse at you), solvent to clean the parts, primer and paint.
     
    judoman09 likes this.
  6. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,463
    38,101
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Would protruding bars on the front of your car be a fail, with any motor vehicle authority?
     
  7. Leadfoot J. McCoalroller

    Leadfoot J. McCoalroller Senior Member

    Joined:
    May 12, 2018
    6,686
    6,375
    1
    Location:
    Pennsylvania
    Vehicle:
    2018 Prius c
    Model:
    Two
    In most US states there are regulations about not putting giant sharp spears on, and sometimes they don't want anything hook-shaped or with certain size holes in it, but there's a lot of latitude.

    And almost exactly the same lack of enforcement there is for the lights themselves- in many states, you have to have an opaque physical cover installed over the lamps when the car is driven on a public street. But I don't think that's earned anyone a ticket since the 1970s.

    The fancy retail light bar seems well made, but I have to question.... grade 10.9 bolts to mount it? That strikes me as idiotic. If when somebody crunches the front end, you'd have a hard time removing those very hard bolts from the bumper to remove the bumper cover for work on the rest of the car. If they used class 4.6 it'd just be a bit of drill work.
     
    judoman09 likes this.
  8. ColoradoBoo

    ColoradoBoo Senior Member

    Joined:
    Jul 19, 2019
    902
    592
    4
    Location:
    Monument, Colorado USA
    Vehicle:
    2017 Prius
    Model:
    Two
    I don't know how many sensors are on a Gen 3, but you wouldn't want to block any of those, either. (The constant beeping would drive you nuts!!)
     
  9. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,463
    38,101
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    License plate visibility too. Might be a factor, depending on where Coffs Harbor is.
     
  10. judoman09

    judoman09 Junior Member

    Joined:
    Mar 8, 2020
    22
    3
    0
    Location:
    Coffs Harbour
    Vehicle:
    2009 Prius
    Model:
    N/A
    hmm ... all good points, thank you. I would love to do the project, but Australian laws do make a point of excluding extensions out front, for pedestrian safety. Which would technically exude number-plate mounting systems, however, these are very commonly used so I guess the police don't enforce that law.
    I think I'll use my light bar with a number-plate mount, and also have two spotlights either side of it, or perhaps hanging underneath. I've been told that it's a good idea to reinforce the area on the inside with some aluminium, to reduce bouncing, so I'll do that.
     
  11. black_jmyntrn

    black_jmyntrn Senior Member

    Joined:
    Oct 23, 2020
    1,199
    324
    3
    Location:
    Los Angeles, CA
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Advanced
    give me a few more weeks, have something cooking for you
     
    judoman09 likes this.