1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Help with constant failing battery - P3000-123, P0A80

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by lbarrack, May 31, 2023.

  1. lbarrack

    lbarrack Junior Member

    Joined:
    Nov 13, 2018
    34
    4
    0
    Location:
    San Diego
    Vehicle:
    2007 Prius
    Model:
    Five
    I want to thank you all. I have read a common complaint about these threads is usually the poster does not have the courtesy to do a final update, just letting them die and leaving everyone wondering if there was a final resolution.
    So this is what has happened.
    The company told me that they thought that the inverter was possibly having problems causing the battery failures. They started looking at the whole charging system and found the 3 way valve was failing and leaking, the inverter pump was also failing pushing very little flow. I purchased a Toyota brand 3 way valve, the after market one failed in less than a year (code P1121). The company, for $625, replaced (they supplied) inverter, inverter water pump and another tested hybrid battery and installed the 3 way valve. They have given me a money back warranty if this does not solve the problem.
    Immediately after the install my average MPG has gone up to 35.5 and still rising, numbers I have not seen in over 3 years. I hope this resolves the issue.
     
    bisco likes this.
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,809
    49,430
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    hi ibarrack, any updates?