1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Headrests too far forward

Discussion in 'Gen 3 Prius Main Forum' started by maddog2020, Mar 28, 2010.

  1. cycledrum

    cycledrum PSOCSOASP

    Joined:
    Apr 9, 2008
    8,245
    1,202
    0
    Location:
    NorCal
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Although I don't have a problem with this in the 2010, I notice they are 'right there'. That would be pretty frustrating.

    One thing you can do is recline the seatback a little more, or height adjust down which reclines seatback a bit.
     
  2. TheSpoils

    TheSpoils Member

    Joined:
    Jul 30, 2009
    304
    49
    0
    Location:
    New Jersey
    Vehicle:
    2016 Prius
    Model:
    II
    seems like no one here is a fan of reclining, except me
     
  3. cycledrum

    cycledrum PSOCSOASP

    Joined:
    Apr 9, 2008
    8,245
    1,202
    0
    Location:
    NorCal
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    For me, the headrests in the '10 Pri are not too far forward. In the 2009, they are too far back from my head, so I added a 7/8" slab of firm foam in a headrest cover.
     
  4. tallprius

    tallprius Member

    Joined:
    Oct 2, 2008
    53
    28
    0
    Location:
    texas
    Vehicle:
    2010 Prius
    Model:
    Premium w/ Solar Cells
    I have found success with Rx300 or Highlander head rests they seem to be more vertical than Prius or Ct200 posts and padded both sides.

    Just shorten the posts about 1 inch and flip them around. The Rx300/Highlander headrest posts are 1mm to -2mm smaller in diameter so just apply clear heat shrink wrap (not electrical tape) to each post and enjoy.

    When you flip headrests around you will lose the click click setting from one side but if you need them to stay up 1 inch just don't cut the posts.