1. Attachments are working again! Check out this thread for more details and to report any other bugs.

What is this tube?

Discussion in 'Gen 3 Prius Main Forum' started by Mike72903, Oct 23, 2023.

  1. Mike72903

    Mike72903 Junior Member

    Joined:
    Sep 16, 2018
    57
    20
    0
    Location:
    Fort Smith, Ar
    Vehicle:
    2009 Prius
    Model:
    Four
    2010 model. Putting in a used brake master cylinder. The tube in question is the vertical black tube with a gray inside that’s just beside the assembly I’m putting in. I assume it’s not supposed to be open like it is pictured. What goes on it? should it just be capped? I don’t recall taking anything off but I am be mistaken. I was surprised to see it when I installed the replacement unit. IMG_0083.jpeg IMG_0083.jpeg IMG_0083.jpeg
     
    #1 Mike72903, Oct 23, 2023
  2. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    8,909
    1,553
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    That is the feed black hose from the lower portion of the brake reservoir goes to there not the upper hose but the very bottom on the bottom of the brake reservoir that black hose will go to that gray fitting and there's a slide clamp that comes down and secures it.
     
    #2 Tombukt2, Oct 23, 2023
    Johnny Cakes likes this.
  3. Johnny Cakes

    Johnny Cakes Senior Member

    Joined:
    Dec 30, 2016
    1,010
    761
    2
    Location:
    Virginia, USA
    Vehicle:
    2015 Prius
    Model:
    Five
    Ya gotta love this forum. Post a random question -- get the definitive answer within the hour.
     
    #3 Johnny Cakes, Oct 23, 2023
    Grit likes this.
  4. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,193
    5,889
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring
    It's the "this car may never work right again" tube.

    I've had a few of those over the years.....
     
    #4 TMR-JWAP, Oct 23, 2023
    Grit and Tombukt2 like this.
  5. Mike72903

    Mike72903 Junior Member

    Joined:
    Sep 16, 2018
    57
    20
    0
    Location:
    Fort Smith, Ar
    Vehicle:
    2009 Prius
    Model:
    Four
    Excuse my confusion please. Are you talking about the circled tube? IMG_1208.jpeg I should have highlighted it in the original question instead of trying to describe it.
     
    #5 Mike72903, Oct 24, 2023
  6. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    8,909
    1,553
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    Hold on I'll be back at this silly car in about an hour and I'll tell you because I'm standing here staring at it with the wiper tray out getting ready to deal with transmission silliness or flex plate or somewhere right there at that connection.
     
    #6 Tombukt2, Oct 24, 2023
  7. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    8,909
    1,553
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    There again that black tube has a black rubber hose that goes up about 2 in '90s over towards the valve cover and connects to a gold metal tube that's bolted just to the side of the EGR valve and goes down to the intake with another rubber hose connected to it just beside the air box.
     
    #7 Tombukt2, Oct 24, 2023
  8. Montgomery

    Montgomery Senior Member

    Joined:
    Sep 11, 2015
    2,254
    2,238
    2
    Location:
    Orange County, CA
    Vehicle:
    2015 Prius
    Model:
    Two
    What would be helpful is if the person who answers the question shows a photo of it connected to whatever it is supposed to be connected to.
     
    #8 Montgomery, Oct 24, 2023
    Tombukt2 likes this.
  9. Mike72903

    Mike72903 Junior Member

    Joined:
    Sep 16, 2018
    57
    20
    0
    Location:
    Fort Smith, Ar
    Vehicle:
    2009 Prius
    Model:
    Four
    Found it, thanks for taking the time to help. Not sure why I would have taken that hose off to remove the brake actuator but all’s well. Here’s hoping the used replacement actuator actually works.
     
    #9 Mike72903, Oct 24, 2023
    bisco likes this.
  10. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    8,909
    1,553
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    Have to resize and do a bunch of dances to do pictures so just look at the gold tube right next to your EGR valve follow it till it connects to rubber over by the brake actuator and that piece of hose plugs into that black tube that's empty I'm pretty simple stuff.
     
    #10 Tombukt2, Oct 24, 2023
  11. Mike72903

    Mike72903 Junior Member

    Joined:
    Sep 16, 2018
    57
    20
    0
    Location:
    Fort Smith, Ar
    Vehicle:
    2009 Prius
    Model:
    Four
    Your description was fine. Thanks again
     
    #11 Mike72903, Oct 24, 2023
(You must log in or sign up to post here.)