WTB 2012-2015 front license plate bracket

I have one laying around somewhere. South Carolina does not require a front plate.

The easier method is to find the dimples in the front bumper cover and drill two 3/16 inch holes and then tap them to M6x1.0.

Then, drill two matching holes into the license plate and fasten it to the tapped holes with two M6x1.0x20mm screws.

Add a clear cover, if you wish.

 

Info on it here:

Front bumper & bumper stay for Toyota Prius ZVW30L - Auto parts - Amayama

Amayama has reorganized their site some, now asks for "frame number". I puzzled over this, then looking in my notes, found I'd noted this:

Frame: ZVW30L (on same decal as VIN, in driver's door opening)

There's further qualification needed, but it's relatively easy; they're just asking for manufacture date.

Part no and description (for 2012-2015):
Toyota 52114-47130 - BRACKET, FRONT BUMPER EXTENSION MOUNTING

Attached is a shopping cart I started (amounts in CDN $'s):

$34.29 plus $13.04 for shipping, comes to $47.33 all-in. Converts to roughly $35 USD all-in

 

The “full” frame no is shown on VIN decal (at drivers door opening), without identification. Also there’s a cover saying frame number, on floor pan at passenger seat, but it’s inexplicably different.