Busbar Replacement

@VZvrtny is your product on Amazon? From your website:



Never mind, found it, on Amazon.ca. But pretty steep...

 

Just ordered a set from Amazon.com $19.95usd, $9.18usd shipping.

Any that are for sale on Amazon.ca $75 and up and shipped from China

Using bus bar nuts from a Gen 4 pack that I just acquired.

 

I have changed the shipping services to include Canada

 

Stock nuts are 12.8mm diameter, these stainless are 13mm (see below, two stainless nuts and one OEM nut as well as stainless vs stock OEM install on the terminal, please note the flange coverage)

 

Is very nice . I use what's clean n ready.

 

When I started cleaning my bus bars, I used sandpaper over a flat surface. I noticed high spots on the bus bars. If I sanded them long enough to remove the high spots, I might remove enough material to increase the resistance. Plus a lot of work. But my car is 14 years old with 229,000 miles. I was impressed with the Acenbay nickel plated bus bar and their nuts. I will check into the CRC battery spray. My initial thought was the clear dielectric grease.

 

Baking soda and a tooth brush.....

 

I’m in the process of switching out the inventory from Amazon, so nothing is FBA at this point. It is a pain and it is also a costly process. I suggest until Amazon FBA is ironed out, visit our online store or eBay, I think you will find the shipping costs to be more reasonable.

 

I replaced my bus bars about 3 months ago. I bought solid copper bus bars. I figured that Toyota knew what they were doing to not use nickel plated bus bars.
They are corroding already. see images. The car has not been used more than 20 miles. Should I scrap these and buy nickel plates bars?

 

Mine aren't yet I ended all the nuts on my brand new battery The minute I got it and sprayed the front and the back of the orange strips The bus bars but some of this red dye looking crap still there and still holding I don't know about 2 and 1/2 or 3 years in now every so often now about yearly I'll lift the edge of the battery cover list of metal cover up in shine a light inside flip the black cover on that side down with my long pic see the red close it back up. But by all means you can certainly get you some nickel plated things and see how they do You might want to get the nuts that go with the nickel plated bus bars.