1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2010 Prius V energy display is blurry/cloudy

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by JC91006, Dec 18, 2013.

  1. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,483
    8,400
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Hi

    I just bought a 2010 Prius V and noticed the energy display is blurry and cloudy. I've read some other thread with others experiencing this issue but didn't find a solution to the problem. It seem to be blurry on the inside part of the display, nothing that can be cleaned off from the outside. Does anybody have a solution to this problem? Thanks
     
    #1 JC91006, Dec 18, 2013
  2. jdcollins5

    jdcollins5 Senior Member

    Joined:
    Aug 30, 2009
    5,131
    1,338
    0
    Location:
    Wilmington, NC
    Vehicle:
    2010 Prius
    Model:
    III
    My dealer removed my dash and cleaned the internal instrument panel lenses. I think the issue was condensation from using the AC with windshield defrost. I think they must have done a better job of sealing the units because I have not had a problem since.

    Luckily mine was under warranty at the time. Others on here reported that their dealers replaced the instrument panel devices.
     
    #2 jdcollins5, Dec 19, 2013
  3. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,483
    8,400
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II

    My car has nearly 60,000 miles and is clearly out of warranty. Reading the complaints online, there really is only a batch of early 2010 models that has this issue. I don't even think I can bring it up to Toyota to cover because it's not a well known issue, except in the early 2010 models. Either case, I'll write to Toyota and see what they can do. Thanks
     
    #3 JC91006, Dec 19, 2013
  4. Seymour1

    Seymour1 Junior Member

    Joined:
    Feb 8, 2024
    160
    17
    0
    Location:
    22967
    Vehicle:
    2010 Prius
    Model:
    Three
    My 2010 has the same problem. It is not the A C condensation because my A C does not work. I saw a youtube of a guy removing the instrument cluster. It is a huge job.
     
    #4 Seymour1, Jul 25, 2024 at 7:22 PM
  5. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,483
    8,400
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    You can remove the cluster and polish the blurry Plexiglas
     
    #5 JC91006, Jul 25, 2024 at 8:23 PM
(You must log in or sign up to post here.)