1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Timing cover leak

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by MaryannH, May 28, 2017.

  1. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    55,606
    38,751
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Timing Cover Gasket Leak | PriusChat
     
  2. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,104
    3,281
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Gunk the engine down, hose it off really well. Drive it to dry it off.
    It's very ikely that their is no leak around the timing cover. There is NOT a gasket
    for the timing cover, it's siliconed. Once it's clean, you can search for where the
    oil is actually leaking from. And how much.
    Since your oil level isn't going down, it's not leaking much, and nothing to be
    concerned about.
    And you do not have to remove the engine to remove and replace the timing cover.

    Either the valve cover gasket or the oil pressure switch is likely leaking. This is common.
    The oil pressure switch is a $10-15 item, and fairly easy to replace yourself.


     
    donzoh1 likes this.
  3. donzoh1

    donzoh1 Active Member

    Joined:
    Jan 19, 2019
    441
    151
    0
    Location:
    Lenexa, KS
    Vehicle:
    2004 Prius
    Model:
    Five
    I don't have a factory service manual but I guarantee I can reseal a gen 3 timing cover gasket without pulling the engine. My guess is pull the coolant pump, AC compressor, passenger side motor mount, etc. Might need to monkey around with a floor jack below the oil pan. One thing you need to look out for (don't ask how I know this) is to make sure you seal the opening/passage near the coolant pump. Otherwise, you will have a good mixture of oil and coolant in short order.