Brake bleeding problem

Sometimes this happens You got to make sure if you haven't looked at the factory manual dialogue there's all kinds of things the parking brake has to be down and so on and so forth I don't know whether the aultel system gives you those primers at the beginning of each step or the start of the system whatever so you may need to check that usually when you get that message you haven't done something that needs to be done before you start the whole business.

 

Did you buy a new OEM brake pump and actuator or used parts?

 

They probably should be brand new I guess that they look like it I see an orange light on your scanner I'm assuming that's not the VCI light I'm assuming you have the VCI light and check mark is green indicating there's communication does your VCI cable or plug not flash green when data's moving or something like that? But there are things that have to be done to the vehicle before all of this works the parking brake has to be down you want to be not ready but in ACC or whatever it is with all the lights on whatever it tells you in the factory manual Chapman or somebody will pop it up here for you in a few minutes and if you don't do all that then highly likely it won't work but I'm thinking that when I had this problem because the parking brake wasn't depressed or something like that it didn't talk about communication problems I don't think but it might have I very quickly figured out that my parking brake wasn't down.