Fuel injector swap

Swapped to Corolla/Matrix 1.8L injectors today, Corolla part #23250-21040. Perfect fit: runs just fine without a tune, although I do plan on getting one soon. Only negative was a roughly-tenth of a second increased lag or hesitation off the line when at low idle. Its negligible though worth noting.

There is a noticable increase in torque in the low end when the engine is already under load otherwise
though. Slightly more burble after revs as well.

Took about 30-35min total, only needed a 10mm, 12mm and an 8mm for the pipe clamp on the intake, and some towels for the gas that spills out the fuel rail, though it was only about 2-3oz. Don't overtighten the fuel rail bolts on reinstall; the plugs won't sit right if so.

Once the intake and EGR valve connection were off it was smooth sailing.

All current mods are listed in my profile description.