1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Cleaned EGR valve, not sure if full circuit is needed. 111k miles

Discussion in 'Gen 3 Prius Main Forum' started by gboss, Aug 12, 2024.

Tags:
Page 3 of 3
  1. gboss

    gboss Member

    Joined:
    Aug 30, 2021
    109
    37
    2
    Location:
    Mountain Town in CA
    Vehicle:
    2013 Prius
    Model:
    Five
    Here are both sides of the cooler. Do you see carbon clogs? To my newb eye I can't see any (there are still bubbles in there as it is still drying from the recent wash). If see carbon or suggest another clean...I think it would be interesting to test either a dish pod or baking soda as those are a much more potent version of Dawn Dish soap. Never tried a pod but baking soda has cleaned out my ovens before.
    IMG_1979.jpg IMG_1980.jpg

    And here is a shot pointed up at a ceiling light:
    IMG_1978.PNG

    Oh yeah, I've been at it over a couple of days. Let it dry. Jammed in the clothes hanger (and wiper blade wire). Cleaning soak. Wire..repeat.
     
    #41 gboss, Aug 20, 2024 at 10:47 PM
    Last edited: Aug 21, 2024 at 12:21 AM
  2. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,160
    3,307
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Days versus minutes??? MMMM (n):whistle:

    I believe it's clean enough.
    You should search ebay, and use duck duck go to search junk yards for the EGR Cooler.
    Get a spare and clean it up for the next time. It will save you a LOT of time and heart ache...
     
    #42 ASRDogman, Aug 21, 2024 at 6:28 AM
    Last edited: Aug 21, 2024 at 12:21 PM
    gboss likes this.
  3. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    55,839
    38,871
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    That’s looking pretty good. With EGR cleaning, you want to get the cooler cleaning started as early as possible; it’s the time consuming part.

    There’s maybe a slight “patina” of carbon on the convoluted fins, hard to tell.

    keep in mind, it’s not just “clogs” you’re trying to dispel; the main object of that contraption is to cool the exhaust gasses, and even a thin layer of carbon reduces it’s efficacy.
     
    #43 Mendel Leisk, Aug 21, 2024 at 8:05 AM
    gboss likes this.
  4. gboss

    gboss Member

    Joined:
    Aug 30, 2021
    109
    37
    2
    Location:
    Mountain Town in CA
    Vehicle:
    2013 Prius
    Model:
    Five
    Thanks, yeah I'm thinking this is good enough to throw on so will knock that out.

    For what it's worth, I found the 'bolt from hell' to be incredible easy, but the two studs holding the cooler on to be incredible difficult to remove (I lost my 12mm socket down in the engine trying to get these things off).

    Reached my arm around backside of the engine and used this tool on the bolt from hell....it took all of 30 seconds to remove:
    tempImageJzssPk.png
     
    #44 gboss, Aug 23, 2024 at 5:13 PM
  5. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,160
    3,307
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Make sure you connect the pcv hose to the intake manifold when you put the intake
    manifold back on. It's right next to the top coolant hose on the throttle body.
    Because if you don't, the hybrid battery will turn the engine over, but it won't start.
    And you'll get the "check hybrid system" on the display... :(:whistle:

    Then you'll have to remove the air filter housing to install it....
    How do I know this???? (n):whistle:

    I cleaned my egr system today. Pretty quick when you have an already cleaned
    spare cooler!
    I also changed the trans fluid and the engine coolant. No issues with air in the system
    because I fill about a cup at a time and VERY slowly, and wait for it to flow out of the
    coolant tank.

    After connecting the pcv hose, and reinstalling the air filter housing, in the hot sun, the
    engine started, ran rough for 3 or 4 second then smoothed out.

    The cooler was completely blocked, but everything else just had soot. Easy to clean out.
    The 4 egr holes in the manifold were not blocked.
    The engine runs VERY smooth again.
     
    #45 ASRDogman, Aug 23, 2024 at 6:22 PM
(You must log in or sign up to post here.)
Page 3 of 3