1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Cruise control fitting - light comes on dash but not slowing vehicle

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by undertheearth, Aug 29, 2024 at 9:01 PM.

Tags:
  1. undertheearth

    undertheearth New Member

    Joined:
    Yesterday
    1
    0
    0
    Location:
    New Zealand
    Vehicle:
    2010 Prius
    Model:
    N/A
    2010 prius (right hand drive model)

    Hey guys, I had to replace my indicator stick recently, and in the process decided to also retrofit a cruise control lever, since I had to completely remove the steering wheel anyway. Installation was/is pretty easy (for anyone else considering it), but, ALL of the pinouts suggested in any videos/images for the installation I could find are already populated with other wires already. The vehicle (previously) had automatic parking installed, before my dealer replaced the head unit with something a little more useful (original was the big screen Japanese model with navigation/Bluetooth)

    I still plugged everything else in (into the slot already existing in the wheel), and while the light comes on in the dashboard and shows set status when set, it doesn't actually impact the vehicle in any way.

    I'll take some photos of the ECM (if that's the right term) under the dash when I can.

    Mostly what I'm asking is where should I be plugging it in? It's a Japanese import model. (ZVW30 I think) I've tried checking the service guide but it's not really clear at a level I understand.
     
    #1 undertheearth, Aug 29, 2024 at 9:01 PM
  2. MAX2

    MAX2 Member

    Joined:
    Aug 12, 2024
    162
    36
    4
    Location:
    Third Rock from the Sun
    Vehicle:
    2007 Prius
    Model:
    N/A
    Please include photos of all connectors you used to make the connections.
     
    #2 MAX2, Aug 30, 2024 at 1:50 AM
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,428
    15,889
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    In the US market at least, there is a dash light that lights when you turn CC on, and another that lights when you have set a speed to maintain (this one being the word SET).

    In cars with CC, the pushbutton switch above the brake pedal (pushed by the pedal arm when the pedal is all the way up) is a dual switch, one pair of contacts responsible for lighting the brake lights, the other pair responsible for cancelling the set cruise control speed. If your car still has the single switch there that comes in non-CC cars, then I would expect the cruise control ON light on the dash to light up, but for the system never to accept a set speed or light the SET light.
     
    #3 ChapmanF, Aug 30, 2024 at 1:49 PM
(You must log in or sign up to post here.)