Hybrid Battery Temperature

Dang I can't wait to hear some reasonable answers to this because 104° seems awfully mild temperature-wise even for a battery I mean for a human that's very bad granted but for running things like a fan motor or various and sundry other things even the 12 volt battery if the lights are on and the alternators charging it is going to run close to that 100° especially if it's 100° outside or close to it You granted have lower outside temps and on the attempt of 73° in the car but the batteries enclosed and all of that so I would expect it to be able to go up about 30° above your ambient air temperature I would think but I guess this could be bad I don't see how you're going to get it much cooler I never really look at mine I figure if it's around human body temperature to high human body temperature must be okay I'm wondering what the electric car batteries are running at that have all the fancy cooling and plumbing and all of that I imagine they must hit around a hundred 102 something as large as they are the big mass and the density.

 

i can't answer for the cca reading, but if the car is making 'ready' i can't see it as a problem.
you might want to open the battery case and see if there is any corrosion or clogging from debris.
and make sure the fan inlet grille is clear.

 

Nothing to worry about @ 40c, that's a cool winters' night in Arizona.

Seriously, I got my cabin temperature set for 20c (68f) when it's cool outside. Cabin is set for 25c when it's 38c+ outside, mainly to ease the strain on the AC unit and conserve power. The traction battery is cooled by the cabin air flow, so the cooler the cabin the better. 40c is normal and well within the batteries operating parameters.

Hope this helps..

 

A static picture will not explain anything.
Hybrid Assistant allows you to take temperature readings in dynamics.
Then you can analyze how quickly the high-voltage battery heats up depending on the discharge and discharge modes.
I assume that the internal resistance of the battery modules is high, which is why the modules physically heat up.
Dr. Prius can show the value of the internal resistance of a pair of modules.
What is the value on your high-voltage battery?

 

A 200+ miles trip last week starting at 19°C outside and ending at 34°C.
You're fine I'd say.

 

Pay attention to the engine temperature. I don't like high spikes up to 116 degrees Celsius.
This could be two things. A bad water pump and a bad EGR. High temperatures can cause a blown head gasket, coolant leaks, damaged cylinders, and engine damage.

 

Yeah, I saw those. Now and then I see those spikes but I hope that's a fluke in reading sensors.
For example this is from the same trip days later coming home.

 

Ok. If it's just a temporary glitch in the Android software, then it's fine.

 

Two years ago I did a half job cleaning EGR circuit. Only intake manifold, EGR pipe and changed PCV valve. EGR flow is now in 14-15.xx range.
In Torque I monitor water pump now and then and it shows a steady 3500 RPM.
Coolant is steady too.
Only problem I have is oil. It starts to disappear. Changing it at 6k miles and during changes I need another 1-1.5 quart.
Now I want to change traction battery but oil consumption holds me back.
I really like the car so I want to take care of it.

Sorry for hijacking thread @AnneN.

 

We have a hefty thread here about EGR flow.
Techstream EGR Valve Blockage Data | PriusChat

I'm using Car Scanner and/or Torque Pro for that.

 

If this is a generation 3 car your battery is pretty old just by the age of the generation 3 itself so it's probably time to pull the orange plug take the top of the battery off and look at the one side under the black covers and see all the black bus bars that should be copper colored like copper pipe and all the videos on Facebook for the plumbing stuff copper not black All of that is adding to resistance then you see the frosted nuts that look like they have cancer growing on them All of that stuff can be removed and if you have a kid that has a rock tumbler buy you some abrasive media throw the bus bars in the nuts in the rock tumbler for an hour wash them and kerosene or Stoddard solution and reuse or buy new that in itself goes a long way for moving electricity around all those modules If you catch it early on and do what you're supposed to do You can get another while out of that set up that you're running If not then you need to do the battery dance or replacement.

 

it's a lot of work to get down to the battery. this video shows how it is done, but he doesn't remove the cover while it is in the car. i think it is best left to a pro.

watch

 

DC voltages below 50VDC won't hurt you. This means that you don't have to disconnect the 12V battery.
If you do remove the traction battery cover, may I suggest you use the 'one hand method'. The theory goes that when your only using one hand/arm - there's no way of completing the circuit. If you lean or rest other appendages against the car, make sure there's a good deal of insulation in between - again so you can't complete the circuit.

Hope this helps....