Thermostat clip seems to be stuck

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by zak.kapoor, Aug 16, 2025.

  1. zak.kapoor

    zak.kapoor Junior Member

    Joined:
    May 19, 2008
    31
    20
    0
    Location:
    West Linn, OR
    Vehicle:
    2008 Prius
    Model:
    N/A
    I have a 2008 Prius with 130K miles. This weekend I was planning to replace the water pump, serpentine belt, idler, and thermostat.

    I got the water pump out but cant seem to get the thermostat hose clamp (clip) out. it keeps shifting in the wrong direction.

    I will appreciate any suggestions on how I can turn the clip back up and get it out.

    Thanks.
     

    Attached Files:

    #1 zak.kapoor, Aug 16, 2025
    Last edited: Aug 16, 2025
  2. BiomedO1

    BiomedO1 Senior Member

    Joined:
    Mar 27, 2021
    2,966
    1,580
    0
    Location:
    SacTown, Ca
    Vehicle:
    2021 Prius Prime
    Model:
    LE
    You mean the hose clamp??? There's specific tools make for hose clamps that you can 'borrow' from any auto parts chain stores or buy one @ harbor freight.

    Hope this helps....
     
    #2 BiomedO1, Aug 16, 2025
  3. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    12,510
    2,213
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    I use long 45 degree needle nose pliers grab and rotate sets the clamp.open . I replace zebra or equal . Better clamps on mine
     
    #3 Tombukt2, Aug 16, 2025
  4. zak.kapoor

    zak.kapoor Junior Member

    Joined:
    May 19, 2008
    31
    20
    0
    Location:
    West Linn, OR
    Vehicle:
    2008 Prius
    Model:
    N/A
    Yes, I meant the hose clamp. I am still a rookie. :confused:

    Thanks for the suggestion. I have a few of the hose clamp tools from Harbor Freight but I could not get this clamp to budge.

    Finally, after a lot of fidgeting, it came off.
     

    Attached Files:

    #4 zak.kapoor, Aug 16, 2025
  5. zak.kapoor

    zak.kapoor Junior Member

    Joined:
    May 19, 2008
    31
    20
    0
    Location:
    West Linn, OR
    Vehicle:
    2008 Prius
    Model:
    N/A
    @Tombukt2 thanks, I might do that also.

    Where can I buy a set of Zebra or Equal clamps?

    Harbor Freight has only STOREHOUSE worm gear hose clams. They look decent but I am not sure if I should use them on a coolant hose?
     
    #5 zak.kapoor, Aug 16, 2025
  6. BiomedO1

    BiomedO1 Senior Member

    Joined:
    Mar 27, 2021
    2,966
    1,580
    0
    Location:
    SacTown, Ca
    Vehicle:
    2021 Prius Prime
    Model:
    LE
    These are cheap and work exceptional well on spring clamps; better than pliers.

     
    #6 BiomedO1, Aug 16, 2025
(You must log in or sign up to post here.)